Read All Recent Posts
Started by Elantric, January 23, 2008, 06:34:25 PM
0 Members and 2 Guests are viewing this topic.
Quote from: kimyo on June 02, 2021, 09:58:25 AMi have an m-audio ex-p and cannot get the full range out of it. the low end never gets below 27 (on a scale of 0 - 100), regardless of how the knob is adjusted.
Quote from: sustainiac on February 15, 2008, 02:06:44 PMVolume pedal Schematics for what you need are here:https://www.vguitarforums.com/smf/index.php?topic=33.msg109#msg109I often rebuild Ernie Ball Vol pedals into what we need. (10k Linear pot ) - When I worked at EB I could not convince them to make a EV-5 compatible pedal (dumb)
Quote from: sustainiac on June 21, 2008, 06:13:42 AMIts odd you are using a FV-50 as an expression pedal for the FC-300Two versions are availableFV-50H = High Impedance = 500K ohm ( for Guitar)http://www.bosscorp.co.jp/products/en/FV-50h/index.htmlAnd FV-50L = Low Imedance 20K ohm ( for Keyboards)http://www.bosscorp.co.jp/products/en/FV-50L/index.htmlBoth are stereo volume pedals, intended to go in the audio signal pathNeither are recommended nor designed to be used as a VG-99 Expression pedal.
Quote from: sustainiac on June 21, 2008, 06:13:42 AMI'm surprised you can get the FV-50L to work as an expression pedal with the FC-300 The EV-5 schematics are pretty clear on the circuit required. (see below)
Quote from: sustainiac on June 21, 2008, 06:13:42 AMThe VG-99 / FC-300 Owners Manuals are quite clear - Use the EV-5, which is a different beast than the FV-50L.( I use a FV-50H on my stompbox Pedal Board)I have three EV-5 pedals, and they are each 10K linear.(actually measure 8.9K ohm)
Quote from: sustainiac on June 23, 2008, 06:53:41 PM>I modified them with pots from the FV-50HHmm - thats rather odd direction to go. The FV-50H is designed for high impedance gutars, and the internal pot in the FV-50H is much much higher than 10K. I recall its more like 200k to 500k and its a logarithmic audio taper.
Quote from: vanceg on June 21, 2008, 12:49:43 AMIt looks like those Maudio pedals have 12K pots in them whereas my fv-50 has a 20K pot. That might explain why I can't get the full range out of the M-Audio pedal.....
Quote from: Lil_Cthulhu on October 25, 2010, 05:09:54 AMSame problem here. I picked up an M-Audio EX.P on Friday. Best I can get is 34%-100%. Missing the full range is going to land that attached to a different piece of gear as of tonight...
Quote from: vanceg on October 26, 2010, 10:53:01 PM...Then I sold the FC-300 and now use a different MIDI pedal which allows me to calibrate the control pedals I am attaching to it.