Tyler Variax HD Workbench Patches
Started by Elantric, January 23, 2008, 06:31:47 PM
0 Members and 4 Guests are viewing this topic.
QuoteThe Mercedes solution is Ossandust's Little Giant mods that turn the FCB into the mothership of MIDI foot controllers, but it costs a bit for all that power and it comes in three sizes. Google the names for more info.
Quote from: Elantric on October 14, 2013, 09:41:33 PMhttps://itunes.apple.com/us/app/fcbbooster/id442907651http://web.tiscali.it/farello/fcb/index.htmlFCBBooster (MAc/WinPC)By Amedeo FarelloFCBBooster is a software tool conceived to increase the performance of the Behringer FCB 1010 MIDI foot controller. It works as an interface between the pedalboard and whatever MIDI device, hardware or software, you want to drive with it, augmenting the controller's capabilities and simplifying its use at once. No, it's not an editor for the FCB 1010.Features:• ability to send a virtually unlimited number of MIDI messages to a virtually unlimited number of MIDI devices simultaneously from each footswitch or expression pedal• ability to send MIDI messages that the FCB 1010 is not able to manage, including system exclusive messages, both fixed and variable• simple but powerful programming capabilities, implemented through a WYSIWYG editor, allow you to define complex functions that would be impossible to handle for a FCB 1010• gives a visual feedback of the functions assigned to footswitches and expression pedals• footswitches can act as buttons, switches or multiple state switches• messages can be individually programmed to be sent when a footswitch is either pressed or released• much easier and faster to program than the actual FCB 1010• entire setups can be saved as documents, allowing backups and fast switching between completely different configurationsWhat's New in Version 2.0• MIDI destination devices and channels are now coupled as "targets" and defined just once in the preferences window, instead of being specified multiple times on an action-by-action basis• multiple state footswitches can now optionally expose their current state to all actions belonging to the same patch, so that these can be programmed to perform only when a control is in a particular state• interfacing with the FCB 1010 has become much easier: FCBBooster is now able to receive a SysEx dump from the pedalboard or load it from a file, apply the possible needed corrections and send it back without requiring any programming on the FCB 1010 (the old step-by-step learn mode is still available); FCBBooster can also save SysEx dumps to a file for backup purposes• the "patches setup" window, now simply called the editor window, has a new, clearer layout, with green lines and boxes indicating the relationships between patches, controls, states and actions; when the editor window is open, the currently selected control is shown with a red border in the main window• there are new "cut", "copy" and "paste" buttons for each of the "patches", "controls", "state" and "actions" sections; the "controls" section also has a new "swap" button to easily exchange position between controls of the same kind• a new "reference bank" preference allows to choose between the traditional mode of operation, that uses a single FCB 1010 bank as source for MIDI messages, and a new "all banks" mode, that limits the number of the definable patches to ten, but lets you select them with the up/down keys on the pedalboard• some new MIDI actions are available: "all sound off", "all notes off", "reset all controllers" for footswitches and "channel pressure" for expression pedals• a new "wait" action may be used to introduce a delay between actions; this can be useful to let some hardware devices digest complex sysex messages before sending them other messages• there is a new, unified preferences window• the "navigation" mode is now not immediately dismissed when a footswitch is pressed; instead it stays active until the "*" activation footswitch is pressed again; the current destination patch is highlighted with a green border in the list at the right side of the main window• the "go to patch" action now supports special destinations like "higher in level", "last visited", "next visited", "previous in list", "next in list", which are analogous to the navigation mode commands• the app is sandboxed[/i]
Quote from: Elantric on April 26, 2015, 02:06:55 PMBest tronicshttp://btpa.com/5-to7-Pin-Midi/http://btpa.com/7-Pin-Midi/Best-Tronics Mfg., Inc.18500 Graphics CourtTinley Park, IL 60477(708) email@example.com