Started by Creamy, May 31, 2020, 03:28:42 PM
0 Members and 1 Guest are viewing this topic.
QuotePatch data transfer failed, are the correct midi ports selected?
Quote... I suspect this version of Linux may be generating a 'virtual device' and placing it first in the list, instead of last.
Bus 005 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hubBus 004 Device 004: ID 04ca:7070 Lite-On Technology Corp. Bus 004 Device 003: ID 05e3:0610 Genesys Logic, Inc. 4-port hubBus 004 Device 002: ID 8087:0025 Intel Corp. Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubBus 003 Device 003: ID 17ef:3070 Lenovo Bus 003 Device 002: ID 17ef:3070 Lenovo USB3.1 Hub Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hubBus 002 Device 005: ID 17ef:3075 Lenovo Bus 002 Device 008: ID 17ef:306f Lenovo USB2.0 Hub Bus 002 Device 007: ID 046d:c534 Logitech, Inc. Unifying ReceiverBus 002 Device 006: ID 0e8d:1887 MediaTek Inc. KATANABus 002 Device 004: ID 17ef:3071 Lenovo KATANABus 002 Device 003: ID 17ef:3071 Lenovo USB2.0 Hub Bus 002 Device 016: ID 0582:01d8 Roland Corp. KATANABus 002 Device 002: ID 17ef:3074 Lenovo USB BillboardBus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubBus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Quote from: Creamy on June 04, 2020, 08:04:03 PMI tried it with my new Katana 100 MkII, and on Fedora 32 (kernel 5.6.0) instead of Debian and am seeing the same issues. Any ideas?
Quote from: gumtown on June 04, 2020, 09:35:38 PMThere are many distinct FxFloorboard versions for Katana MK2, Katana Original Firmware 4, Firmware 3, Firmware 2 and Firmware 1.So the version you download needs to match the Model and firmware of Katana.Linux systems will only run on ALSA midi system, make sure you have all the ALSA libs installed, and not using JACK midi.There is no Linux 32 bit version, so it would be impossible to run on Fedora 32.
Quote from: gumtown on June 11, 2020, 07:56:21 PMI have posted an updated Linux version, which will give more details on the Midi device list.Please note: i don't have a Katana MK2, only the mk1 original, so it is difficult to get this one right, although the midi I/O system should work fine as it is a duplicate of the MK1 which works fine on Ubuntu 18:04.
Quote from: mvptarheel on June 12, 2020, 08:02:39 PMI have tried both the Windows (10) and Linux (Mint) versions on my Artist mk2. They both connect and edit patches pretty well as far as I can tell. Biggest issue is that I can't save a mk2 patch to disk. It changes my patch to LIQUID DRIVE 1, always the same patch, both on disk and in program, but doesn't touch the patch in the Katana. I have to "read current patch" to get it back. Writing to amp works fine, though, as well as saving mk1 patches. Quick save doesn't seem to work, either, as it often crashes the program. I haven't tried to load a system backup, as it gives a data transfer error when I try to save it. Again, both Windows and Linux seem to function in the same way for me. I'll be glad to help in any way if I can.
Quote from: mvptarheel on June 12, 2020, 08:02:39 PMBiggest issue is that I can't save a mk2 patch to disk. It changes my patch to LIQUID DRIVE 1, always the same patch, both on disk and in program, but doesn't touch the patch in the Katana. I have to "read current patch" to get it back. Writing to amp works fine, though, as well as saving mk1 patches. Quick save doesn't seem to work, either, as it often crashes the program.
Quote from: nino on November 01, 2020, 01:45:48 AMHello all,I am new to this forum and just looking for help. I count on your kindness, my english is very light :-)I am writing in this thread because I guess I am in the right place.Here is my problem.Subject: no midi connexion on linux with katana mk2I just testing fxfloorboard with my new Katana mk2. (Firmware version 1.02)the fxfoorboard version: https://sourceforge.net/projects/fxfloorboard/files/KatanaFxFloorBoard/Katana%20FxFloorboard%20for%20MK2%20Desktop/Katana-MK2-FxFloorBoard_Linux.tar.gz/downloadMy kernel linux is 5.3.18. ( i have tested many other versions)MK2 is reconized by my USB system.If i test with Fxloorboard for MK1 , i have three midi in/ out connection name "KATANA" and i read "user patch" with connect button.But with mk2 software, i have no midi in/out device in preferences menu. ( No midi device available)In preference menu i have tested all options, debug,, auto usb etc ...I use tarball linux 2020-10-07Thanks for your helpNino
Quote from: gumtown on November 01, 2020, 12:38:16 PMHi Nino,I have found a problem with that version, and have now (hopefully) fixed the problem with the Midi device list.A new Linux version of Katana MK2 FxFloorBoard 20201101 is now available athttps://sourceforge.net/projects/fxfloorboard/files/KatanaFxFloorBoard/Katana%20FxFloorboard%20for%20MK2%20Desktop/:-)
Quote from: tocamac on December 20, 2020, 10:21:12 AMHi Gumtown,it seems you have provided the fix just for MkII (2020-11-01), but the MkI version is still the "old" one (2020-10-07). Can you please upload the fix for MkI as well?Thank you for your great SW!Bob
Quote from: gumtown on December 20, 2020, 01:39:48 PMIs there an issue with the MK1 version on Linux?, as the issue was only with the MK2 version, for which both versions are now running the same midi I/O code.