Tyler Variax HD Workbench Patches
Started by shawnb, February 16, 2015, 02:51:55 PM
0 Members and 1 Guest are viewing this topic.
Quote from: Spider on February 16, 2015, 11:13:16 PM1. What is Song mode?
Quote from: Spider on February 16, 2015, 11:13:16 PM2. For me in HW mode split by fret/string is possible inside TP the same with fake split by touch i.e. different sound with pick and fingers.
Quote from: Spider on February 17, 2015, 11:11:45 AMYou program your patch in FTP app. But instead of VST you use 4 programs from your hardware synthesizer + 1 for pedal. Then set strings/frets splits.
Quote from: Spider on February 17, 2015, 11:11:45 AM"Fake" by sensitivity triggered patch you can make using 1 and 3 Syths sounds. Both are full neck, all strings patches and normally will sound together. But... when you set Dynamic sensitivity in opposite direction: In Synth 1 on for example full left, on Synth 3 you set full right, one can be triggered by pick the other by fingers (or light / strong touch). Of course all is in precise tweak this parameters for your playing style.
Quote from: MusicOverGear on April 22, 2015, 07:46:47 AMI just found this - very cool and thank you.I have been interested in switching Pitch Bend Mode from MainStage without running any of the Fishman software - may be superstition in 2015 but I still like to run the fewest possible things on a performance computer.
Quote from: shawnb on February 17, 2015, 01:25:03 PM... where different settings apply (e.g., transpose), & regions overlap, regions 1 & 2 trump regions 3 & 4.
Quote from: andras.szalay on April 30, 2015, 12:53:57 PMIf regions for 1-2 and 3-4 overlap, then guitar related parameters (e.g. Trigger Mode) are taken from 1-2, but MIDI related parameters (like Transpose) are preserved for both. So, e.g. you can set sounds 1 and 3 to the same distorted guitar with one of them transposed by 7 semitones, and play the fifth parallel solo of "Pictures of Home" alone (I believe Ritchie Blackmore required playback for that), or set up a 12 string guitar with transposing 12 semitones.Andras Szalay
Quote from: Mrelectric on February 24, 2020, 03:44:32 PMI'm not sure what mapping I might need to force this in mono mode on 6 channels. Turning Local On or Off doesn't seem to make any difference.
Quote from: shawnb on February 24, 2020, 04:04:59 PMThere are two ways to get mono mode on the FTP.The first is to create a HW patch that is in mono, and save it to the FTP. To use, you must boot your FTP in HW mode by holding the UP key when powering up the unit. Now the FTP honors your HW patches saved to the unit. This is the technique I use pretty much all the time, as it has the greatest flexibility. Note you can save a series of different HW patches with different settings & switch back & forth as needed.The second is in "basic" mode - when powered up normally. The FTP will respond to a CC#126/127 to switch between mono & poly. But you need some device to send the CC to the FTP.
Quote from: Mrelectric on February 26, 2020, 01:25:36 PMThanks both. I should've mentioned that I use the Kenton USB host mkII for the FTP receiver and routing MIDI out to the GR1. However, it doesn't give any reconfiguration capability in the way that it looks like the Disaster Area Ghost Converter does (or BomeBox).