Boss ME-90

Started by mchad, July 06, 2023, 01:47:32 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

mchad


Matteo Barducci

The old models had also patches for acoustic and bass, if I remember well...
--

---> Matteo Barducci

Elantric


Elantric


Elantric

#4





m

Elantric

Boss ME-90 Not expected to ship to USA dealers until Sept 18, 2023  - so wont be using this summer.
https://www.chicagomusicexchange.com/products/boss-me-90-multi-effects-unit-1816157

Tone Jones

Are there any solutions out there that would allow the ME90 to send MIDI PCs?

( . )( . )

I still mess with my ME-80 as my main bedroom "amp"/scratchpad - with headphones, or into my computer for a quick recording. I love it, and have never had an issue.

So far, I haven't been able to find a direct comparison between the ME-80 and 90...for $300, I'm inclined to upgrade, but I would like to know exactly what is better (besides the sound engine - the ME-80 is plenty good enough for my uses).

Maybe I just need to wait and see...

gumtown

Quote from: Tone Jones on July 16, 2023, 10:59:30 PMAre there any solutions out there that would allow the ME90 to send MIDI PCs?

I guess at this stage, no one knows.
 There is no midi out hardware, and if the ME-90 sends/receives PC over USB, then maybe a USB to midi port device might work,
 but I would find it unlikely that it would send/receive program change over USB.
 
Free "GR-55 FloorBoard" editor software from https://sourceforge.net/projects/grfloorboard/

Elantric

#9
ME-90 is fully compatible with all recent Boss wireless pedals ( after adding the Boss BT Dual adapter )    i bet there can be a MIDI out solution via an IOS/  Android MIDI Controller app that supports BLE

Elantric


Elantric


Elantric


5454stevef

Quote from: Tone Jones on July 16, 2023, 10:59:30 PMAre there any solutions out there that would allow the ME90 to send MIDI PCs?
Yes.  I tested a "Doremidi UMH-21 Midi Host box with mine, and was able to successfully send PC messages to my old Pod with DIN ports.  You have no control over the message content except for midi channel.  The PC value appears to be hardcoded to each preset switch.