Started by shawnb, February 16, 2015, 02:51:55 PM
0 Members and 1 Guest are viewing this topic.
Quote from: Mrelectric on March 07, 2020, 09:44:16 AMThanks for your comments.I'm not sure what "reconfiguration" or MIDI commands might be needed to get the FTP to reliably drive the GR1. I am using the FTP app and MIDIOX to try to work that out. That was part of my OP question. Your original post is really helpful as a starting point .My experimentation has been very on and off so haven't made much progress. I am trying to be systematic but there are probably some basic errors.I think you will be right about the Ghost; it looks to be a simple pass through unit like the Kenton.Thanks for the note about the BomeBox confirming its flexibility. If I can discover what the GR1 needs from the FTP and what the FTP cannot output, it looks like it could be what is needed in a real-time PC-less rig.
QuoteHow I long for the engineering ethics of the 1980's, when you would buy a device, say a Yamaha FB04 or Kawaii Synthesizer, or maybe a TR-505 drum machine, and included in the documentation would be a more or less complete specification of how the device interacted with MIDI, including detailed specs about midi syses messages.Those days are long gone.Nowadays when you buy a device, most likely you will not be able to find out anything about it's midi sysex implementation, although it has one. ...
Quote from: cartedoe on October 28, 2023, 10:02:40 AMHi, I'm using the TriplePlay Connect (firmware v1.45) in Basic Mode, and trying to switch into Mono by sending a CC#126 value on channel 1. It doesn't seem to respond.The MIDI hex data I'm sending is: B0 7e 06Should this work with the TriplePlay Connect?
Quote from: admin_shawnb on October 30, 2023, 02:25:10 PMHmmm...The Fishman TriplePlay Wireless, the original model, in the past, honored several standard midi inbound signals. Those are doc'd in the original chart above, and discussed with others in the first page of this thread. Used to work... I just did a quick test, and the FTP no longer appears to respond to the standard CCs for Mono (CC126), Poly (CC127). So yes, it appears that the only way to do this now is via hardware mode patches at this point.I'm surprised they removed that capability. It's possible they removed CC66 support, too... Note: Midi Mode 4 - Omni Off/Mono, is what guitar synth users have long referred to as "Mono Mode". "Midi Mode 4 Omni Off/Mono" is a mouthful. https://audiointerfacing.com/what-are-midi-modes/#midi-modes-summaryIt's not specific to Roland.
Quote from: Elantric on October 31, 2023, 12:58:35 PMReview once known working MIDI IMPLEMENTATION for Fishman Tripleplay compiled here 2015https://www.vguitarforums.com/smf/index.php?topic=13653.0