VB-99 and FC-300 in Stomp Box mode

Started by rowka, February 01, 2018, 06:06:05 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

rowka

taking a cue from fokof I started making a standard list of CC#s for effects I regularly switch in Stomp Box mode (Control Mode on the FC-300).
FV
OD/DS switch
Chorus switch
Mod 1 switch
Mod 2 switch

Some patches start with them all off, others with them all on, or some on-some off.

I've turned the Assign Hold on, pretty much because the position of the FV should be persistent.  But a side effect of that is that the state of the effect switches controlled by CC#s is also persistent.  That is, when I go to a clean to a dirty patch, the OD/DS defaults to OFF.

Any way around this?

fokof

In CC mode , the FC300 doesn't receive info from the VB99 as opposed to Sys Ex mode.
They will stay Lit even if the new programed patch has your FX off.

There is no way around this.

You could stay in Sysex mode but add ext ctrl.

Or you have to Close all the ones that are on before switching patch.  :P