Author Topic: MS-3 - CTL Out Options  (Read 289 times)

0 Members and 1 Guest are viewing this topic.

Offline Elantric

MS-3 - CTL Out Options
« on: September 29, 2017, 08:25:37 AM »
I was playing with the free MS-3 Editor, to explore what signal routing and control options  the MS-3 has to offer
https://www.boss.info/us/products/ms-3/downloads/

Interesting in the SYSTEM Area, there is assignment for the MS-3's CTL !/2 OUT jack functions

 see page 40 of the MS-3 Parameter Guide
  https://static.roland.com/assets/media/pdf/MS-3_Parameter_Guide_eng02_W.pdf

LAT  =(LATCH) Latch operation ( aka Toggle Switch action )

PLS  = (PULSE) Send a pulse when changing patches. (aka Momentary Switch action )

INV  = INV (INVERTED Polarity Pulse - aka Momentary Switch action changes from N.C. (Normally Closed)  to  N.O. (Normally Open)  )

TAP2  = Turns on/off twice at the Master BPM setting when the patch changes.

TAP3  = Turns on/off three times at the Master BPM setting when the patch changes

TAP4  = Turns on/off four times at the Master BPM setting when the patch changes




 
« Last Edit: January 11, 2018, 02:16:14 PM by admsustainiac »

Offline MrHaroldA

Re: MS-3 - CTL Out Options
« Reply #1 on: January 11, 2018, 02:08:23 PM »
Small addition: LAT means that it's latched in OFF mode, and disconnected on ON mode.

Weird guys there at Boss/Roland.  ???

Offline admsustainiac

Re: MS-3 - CTL Out Options
« Reply #2 on: January 11, 2018, 02:16:31 PM »
LAT  =(LATCH) Latch operation ( aka Toggle Switch action  -= Press ON, then Press OFF)

PLS  = (PULSE) Send a pulse when changing patches. (aka Momentary Switch action )

INV  = INV (INVERTED Polarity Pulse - aka Momentary Switch action changes from N.C. (Normally Closed)  to  N.O. (Normally Open)  )

TAP2  = Turns on/off twice at the Master BPM setting when the patch changes.

TAP3  = Turns on/off three times at the Master BPM setting when the patch changes

TAP4  = Turns on/off four times at the Master BPM setting when the patch changes
« Last Edit: January 11, 2018, 03:03:32 PM by admsustainiac »