Boss GT-100 Owners Manual & Parameter Guide

Started by Elantric, March 09, 2015, 09:59:37 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Elantric

Boss GT-100 Owners Manual
http://lib.roland.co.jp/support/en/manuals/res/62306816/GT-100_e03_W.pdf

Boss GT-100  Parameter Guide
http://lib.roland.co.jp/support/en/manuals/res/62306818/GT-100_parameter_e02.pdf

Boss GT-100 V2 Addendum
http://lib.roland.co.jp/support/en/manuals/res/63100372/GT-100_l_v2_e01_W.pdf

http://cdn.roland.com/assets/media/pdf/GT-100_v2_AD.pdf


Boss GT-100 MIDI Spec V2
http://cdn.roland.com/assets/media/pdf/GT-100_v2_GT-001_MI.pdf


GT-100 Preset patch List
http://lib.roland.co.jp/support/en/manuals/res/62306817/GT-100_v2_patch_e01_W.pdf

GT-100 Training Guide
http://raptor.rolandgermany.info/assets/media/pdf/GT-100_Training_Guide.pdf


GT-100 Turbo Start
http://cdn.roland.com/assets/media/pdf/GT100ts.pdf


GT-100 Tone Room
http://www.bossus.com/go/gt-100_tone_room/

https://www.facebook.com/notes/boss-us/tips-tricks-gt-100-accessing-quick-user-settings/10150929930532493

Product: BOSS GT-100
Topic: Accessing the Quick User Settings in EFFECT

If you are new to guitar effects and don't necessarily know how to dial up a phaser or a flanger, here's a quick tip to access some pedal effect specific presets that exist in the Quick User Settings of the EFFECT button.
Push the [EFFECT] button.
In the left LCD screen, turn the [SELECT] knob to highlight the FX1 icon, if it is off, use the [ON/OFF] knob to turn the effect on.
Turn the [TYPE] knob and dial up the PHASER.
Push the [PAGE] left button until you get to the "Quick User Setting".
Turn the [QUICK SETTING] knob to the right until you get to P01: VINTAGE PH.  This is a preset for a classic vintage phaser.
Dial through P01-P05 to hear some different phaser specific effects presets.
You may have noticed as you were turning the [QUICK SETTING] knob that there were also slots U01-U10.  These are where you can save your personal phaser settings for quick recall in other patch presets.
For more information: http://www.bossus.com/gear/productdetails.php?ProductId=1187





Elantric



In this tutorial Jeff Blute shows us how to automate the patches in the BOSS GT100 inside the REAPER daw.