Katana Combo to Head Conversion Project

Started by Stratman_61, August 15, 2021, 10:12:21 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Stratman_61

Never cared for the combo's panel location/orientation, so I relocated the heat sink, added a speaker out and built a shell for a separate head. The forward facing panel is much easier for tweaking controls. Not covered in tolex yet and haven't attached the BOSS logo from the old combo enclosure (now a speaker cab). Would have been easier with an Artist combo, but this was a fun project during lockdown.

admin

#1
Good job!


Must open the postimage pic in New window and copy direct from there , to obtain the jpg file type in url

https://i.postimg.cc/D04zz03q/katana-front.jpg




I'm doing the opposite

I have a few Katana 100 combo's and going to swap the chassis to end up with my MKII Head Chassis (with MIDI In and Cab Select switch) in a Katana Combo - just sorting if I want to retain the 5" speaker or determine how to use that with a combo "chassis" in the former Head Wood cab


Stratman_61