Brian Moore I guitar 1.13 outputs

Started by Jim Williams, March 06, 2021, 01:35:50 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Jim Williams

I recently bought a Brian Moore I guitar 1.13 and when using the 13 pin out it only puts out the magnetic pickups from the 13 pin cable. Is there some way to fix it so I can get a mix or the magnetic pickups and the piezo pickups?
Skype: (upon Request)

Everything from modeling to the real deal, my house looks like a music store.

admin

#1
Quote from: Jim Williams on March 06, 2021, 01:35:50 PM
I recently bought a Brian Moore I guitar 1.13 and when using the 13 pin out it only puts out the magnetic pickups from the 13 pin cable. Is there some way to fix it so I can get a mix or the magnetic pickups and the piezo pickups?



with or without USB?

its typically a RMC PolyDrive system - like a Godin

Contact iGuitar
http://iguitarworkshop.com/supportandresources.aspx

Manual
http://iguitarworkshop.com/Custom%20Shop-Owners%20Manual.pdf


Schematics
https://www.vguitarforums.com/smf/index.php?action=dlattach;topic=79.0;attach=55
https://www.vguitarforums.com/smf/index.php?topic=79.0

Paresh

I have the 1.13 & the selector switch should give you 13 pin, mags or both. Here's the manual: https://blog.panorama.org/category/active-living/
paresh

GuitarBuilder

Quote from: Paresh on March 07, 2021, 10:12:26 AM
I have the 1.13 & the selector switch should give you 13 pin, mags or both. Here's the manual: https://blog.panorama.org/category/active-living/

I was going to mention the MIX toggle switch as well.  Otherwise, iGuitar Workshop will be very helpful.
"There's no-one left alive, it must be a draw"  Peter Gabriel 1973