MS-3 - Several new updates to MS-3 Firmware

[jwhitcomb3]

Several new updates to MS-3 software:

https://www.boss.info/global/support/by_product/ms-3/updates_drivers/4b36a7a0-5d46-4ea7-85ce-cc6f3d8c36c7/

MS-3 System Program (Ver.1.07)

Update history
[ Ver.1.07 ] MAR 2019
Bug Fixes
The following bugs were fixed.
When a "CURRENT NUMBER" setting has been made for a controller at "CTL, ASSIGN & MIDI SETTING," operation of the "CURRENT   NUMBER" number switch, immediately after a bank change, has no effect.
In bank operations using CTL IN, when "BNK.CHG (BANK CHANGE MODE)" is set to "IMMED (IMMEDIATE)," repeat function sometimes stops.

MS-3 Editor / Librarian Ver.1.0.3 for Windows

Update history
[ Ver.1.0.3 ] MAR 2019
Compatible with the MS-3 Ver.1.07.

Bug Fixes
The following bugs were fixed.
When ASSIGN TARGET is set to "FX1 TYPE" or "FX2 TYPE," the changing data of "TARGET MIN" or "TARGET MAX" is not sent to the MS-3.
After changing to the patch which's ASSIGN TARGET is selected to "MIDI" , "CH" and "CC#" are uneditable.

MS-3 Editor / Librarian Ver.1.0.3 for macOS / OS X

Update history
[ Ver.1.0.3 ] MAR 2019
Compatible with the MS-3 Ver.1.07.

Bug Fixes
The following bugs were fixed.
ASSIGN TARGET が "FX1 TYPE" または "FX2 TYPE" の時、TARGET MIN / TARGET MAX を変更しても MS-3 本体に反映されないことがある。
ASSIGN TARGET が "MIDI" のパッチを選択した時、 "CH"、"CC#" がエディットできなくなることがある。

[admin]

https://www.boss.info/us/support/by_product/ms-3/updates_drivers/f4340fbc-3a4b-4a93-b7a9-1daedc53355c/

Update history
[ Ver.1.07 ] MAR 2019
Bug Fixes
The following bugs were fixed.
When a "CURRENT NUMBER" setting has been made for a controller at "CTL, ASSIGN & MIDI SETTING," operation of the "CURRENT NUMBER" number switch, immediately after a bank change, has no effect.
In bank operations using CTL IN, when "BNK.CHG (BANK CHANGE MODE)" is set to "IMMED (IMMEDIATE)," repeat function sometimes stops.
[ Ver.1.06 ] OCT 2018
Bug Fix
The following bug was fixed.
Bank operations using CTL IN sometimes fail to repeat.
[ Ver.1.05 ] MAR 2018
Bug Fixes
The following bugs were fixed.
While editing CTL OUT, operation of CTL1 or CTL2 causes interference.
Clicking the "CLEAR" button in MS-3 Editor/Librarian does not clear the CTL or ASSIGN function on the MS-3 unit.
[ Ver.1.04 ] NOV 2017
Compatible with the MS-3 Editor/Librarian Ver.1.0.1.

Bug Fixes
The following bugs were fixed.
When the PATCH MIDI parameter of PC, BANK MSB, BANK LSB, CC1 NUM, or CC2 NUM is set to its maximum value, the data in Editor/Librarian goes to "0."
When BNK.CNG (BANK CHANGE MODE) is set to WAIT, bank switching sometimes fails to occur when number switches ([1] + [2] or [3] + [4]) are pressed or an external pedal is depressed.
When a "B0" (bass 5th string open) note is input to B.HARMONIST, the harmony pitch is not correct.
[ Ver.1.03 ] AUG 2017
Additional Function
Support for MS-3 Editor/Librarian Added
Bug Fixes
The following bugs were fixed.
When DELAY TIME is set to notes, the TAP illumination time is incorrect.
When "KNOB ASSIGN = BPM" is in effect, the state when PREF for BPM has been switched using SYSTEM<=>PATCH is sometimes erratic.
The only value that can be selected for PEDAL BEND - PITCH - MIN/MAX using ASSIGN is "0."
After a PATCH CHANGE operation, CTLOUT is sometimes in an unintended state.
At the EFFECT CHAIN screen, if a CTL IN jack is disconnected or when the FS-5L is ON (LED illuminated), EFFECT TYPE is sometimes unselectable.
The internal state of ASSIGN TARGET = MIDI CC# is not reset by a patch change.
When the OUTPUT SELECT value for PREFERENCE is changed, the setting fails to be applied until the power is reset.
Change the specifications
The specifications have been changed so that during continuous INC/DEC of PATCH/BANK by external control, REPEAT is stopped when PATCH MIN/MAX is reached.
The specifications have been changed so that when BPM TAP or DLY TAP is assigned to the MEMORY/MANUAL switch, the indicator flashes in MEMORY MODE as well.
The specifications have been changed so that WAIT can be used when using CTL IN to perform a BANK UP/DOWN operation.