13-pin Pedal Board Pass THrough

Started by MikePeloquinAcoustic, January 05, 2018, 11:44:57 AM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

MikePeloquinAcoustic

I am building a new pedal board to accommodate my acoustic looping rig for my Taylor 312-ce with a GK-3. I am able to locate 1/4 pass through jacks that will be mounted on the board.

Is there a similar type of jack for 13-pin midi cables? I am brand new to the GR-55 world and have been unable to find a product to work. Any advice would be greatly appreciated.

Here is the link to the 1/4 pass-thru for reference:

http://www.creationmusicsupply.com/1-4-in-solderless-pass-through-jack-black/

Elantric

Quote from: MikePeloquinAcoustic on January 05, 2018, 11:44:57 AM
I am building a new pedal board to accommodate my acoustic looping rig for my Taylor 312-ce with a GK-3. I am able to locate 1/4 pass through jacks that will be mounted on the board.

Is there a similar type of jack for 13-pin midi cables? I am brand new to the GR-55 world and have been unable to find a product to work. Any advice would be greatly appreciated.

Here is the link to the 1/4 pass-thru for reference:

http://www.creationmusicsupply.com/1-4-in-solderless-pass-through-jack-black/


closest would be a Roland US-20  - which is a GK13 pin A/B/Both adapter box, allows one GK13 pin guitar to drive two separate GK Processors (VG-99+GR-55)

there are third party alternatives to the US-20 here:


GK Accessories
https://www.vguitarforums.com/smf/index.php?board=13.0

PRIMOVA SOUND (CodeSmart)
https://www.vguitarforums.com/smf/index.php?board=176.0


DR Wayne Joness
https://www.vguitarforums.com/smf/index.php?board=178.0

Majiken

Quote from: MikePeloquinAcoustic on January 05, 2018, 11:44:57 AM
Is there a similar type of jack for 13-pin midi cables? I am brand new to the GR-55 world and have been unable to find a product to work. Any advice would be greatly appreciated.

I am offering a Primova Sound GKPX-14 GK parallel box used for sale that splits one input into four outputs (and more), take a look here: https://www.vguitarforums.com/smf/index.php?topic=22285.0

I'm in Germany, but see no issue sending it to the States.  The price is negotiable, send me a PM if the unit looks interesting and we'll figure something out.

Best, Kenny
Take what you need, put back a bit more, leave the place behind you better than it was before :-)

www.majiken.rocks

MikePeloquinAcoustic

Thanks for the replies.

I don't need to split the signal... just want to have a clean interface on the pedal board.

Elantric

Quote from: MikePeloquinAcoustic on January 05, 2018, 01:20:21 PM
Thanks for the replies.

I don't need to split the signal... just want to have a clean interface on the pedal board.
nothing available
the buffers are already in the guitar ( or in the GK-3 PU wart) https://www.vguitarforums.com/smf/index.php?topic=14088.0