Fix: Volume fluctuations with older RMC piezo and Axon 50/100 units

Started by gearhound22, March 11, 2022, 07:02:21 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

gearhound22

Hi all,

I noticed on my synth when I would change between the guitar/mix/synth button the volume (0-127) going into the synth would start to fluctuate and wouldn't calm down until I unplugged and plugged it back in (if vol was not at max initially plugging in on the guitar it would fluctuate).

This would also cause ghost notes when hitting chords.

I spoke with RMC and soldered a 0.047µF capacitor between pin 8 and gnd and it worked perfect.

My newer RMC guitar had no issue but this might help someone else with the same problem.


gumtown

Free "GR-55 FloorBoard" editor software from https://sourceforge.net/projects/grfloorboard/