GP-10 - Assigning Ctl1 or Ctrl 2...

Started by jackstrat, July 30, 2014, 03:22:58 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

jackstrat

I am having difficulty assigning Ctrl1 or 2 to an effect to turn the effect on and off...

I edit the preset, cursor to Ctl1, run through the options, save the preset. The ctl1 LED lights, but pressing the button does not turn off the assigned effect.

Any idea what I am doing wrong?

Thanks
JackL

Elantric

#1
I advise use Boss Tone Studio for GP-10 to assist and debug using the GP-10 CTL Assignments - its easier to debug and observe any conflicts


Elantric


GP-10 with FS-7

These are the options

GP-10 assign  [toggle] + FS-7  [Latch] = double latching, pedal requires 2 presses to do one function (effect on/off)

GP-10 assign  [toggle] + FS-7  [Moment] = press once to toggle effect on/off, pedal led only lights while held down

GP-10 assign  [moment] + FS-7  [moment] = effect only on while pedal held down, pedal led only on while held down

GP-10 assign  [moment] + FS-7  [Latch] = press once to toggle effect on/off, pedal led toggles with effect status