Swedish Death Metal guitar sound

Started by MilhausCorpse, May 16, 2023, 12:47:33 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

MilhausCorpse

Hello.
I bought a Boss GT-1000core last week and I am absolutely amazed by its sound.
As a lover of Swedish death metal, I immediately started creating a sound similar to Vomitory or Bloodbath.
Do you think I can play directly from Boss to PA with this patch?
Or what is wrong. I'm so excited about the sound of the Boss GT-1000core that I'd be playing it live this weekend.
Thanks for the responses.
My guitar is a Jackson Soloist X series.
I am also attaching the output settings.


gumtown

Yes should work great direct to desk/PA, you have the correct global EQ setting for that, just be sure the signal is not too hot into the mixing desk input.
Free "GR-55 FloorBoard" editor software from https://sourceforge.net/projects/grfloorboard/

Elantric

Always verify Mic Phantom Power is turned OFF on the connected PA Mixing console

MilhausCorpse

Good day.
Thanks a lot for the answers. I hope that my first liveshow on Saturday, when I will play directly from the multi-effect to the PA, will be excellent.
Thank you once again.

gumtown

Will be a good idea to set equal levels on the patches you use at gig volume,
 because setting up patches at home might sound good,
 but when the levels are higher at a gig,
 the differences between patch levels are more pronounced.
Free "GR-55 FloorBoard" editor software from https://sourceforge.net/projects/grfloorboard/

MilhausCorpse

Thanks for the warning.
I use three patches and they come from the same base, so the sound level is the same.

MilhausCorpse

Thanks again for the advice!
My first live show from the BOSS GT1000core directly to the PA was great. Everything worked perfectly and the sound was amazing. So now I managed to sell my old tube gear and build my first and hopefully last pedalboard.