Eurorack ATG Prototype - First Run

Started by GuitarBuilder, March 11, 2019, 03:41:23 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

GuitarBuilder

It's been a while, but I finally finished the first prototype of my Eurorack ATG module.  It's a 10HP module, powered by the Eurorack 12V supply.  I replaced the 8-pin DIN connector with a standard pair of 5-pin MIDI In/Out connectors by designing a MIDI + power board (you can see it near the bottom of the assembly).  All functionality of the ATG DSP has been retained. I'm also working on a prototype 13-pin breakout board with individual string amplifiers/attenuators, from which the ATG module will receive string signals.  You can see this next to the ATG in the rack.

In the Eurorack:


Front panel view:


Side view - note MIDI board near bottom:


Another side view - all standard ATG cabling was retained:


Back view showing DSP board and Eurorack power connector:
"There's no-one left alive, it must be a draw"  Peter Gabriel 1973

whippinpost91850

#1
This is wayg too cool. Please keep us posted

chrish

Quote from: whippinpost91850 on March 11, 2019, 04:28:18 PM
This is wayg too cool. Please keep us posted
agree. Why didn't Antares think of that. Other manufacturers sure could extend their Market by producing a eurorack version of their products

For example there's a T-Rex version of the tape delay in pedal form and eurorack module.

gumbo

Read slower!!!   ....I'm typing as fast as I can...

mooncaine