Started by fokof, June 19, 2009, 10:18:01 AM
0 Members and 1 Guest are viewing this topic.
Quote from: aliensporebomb on September 08, 2009, 10:13:17 AMQuestion: how are you adding 6 ms delay to A so it doesn't sound until "B" gets the show on the road?
Quote from: aliensporebomb on September 08, 2009, 10:13:17 AMDo you have some audio examples of this delay happening?
Quote from: aliensporebomb on September 08, 2009, 10:13:17 AMAre you running regular 4-string bass or 5 or 6 string?
Quote from: aliensporebomb on September 08, 2009, 10:13:17 AMAnd are the patches with the latency showing synthesizer type patches?
Quote from: aliensporebomb on September 08, 2009, 10:13:17 AMI'm wondering why the delay if it's just modeling an effect or amplifier tone.
Quote from: aliensporebomb on September 08, 2009, 10:13:17 AMI wonder if it's similar to the delay with the GR300 emulation on the VG99, Premiere Guitar said that the delay on the GR was something on the order of 12 milliseconds but on the real GR300 it was 2-3 milliseconds.At least that's my recollection for the article contrasting and comparing a VG99 emulation of a GR300 and a real GR300.
Quote from: fokof on September 07, 2009, 07:45:30 PMFound out something else concerning latency , there is a slight latency (haven't checked how much) between the "direct" signal and a "normal Pickup" , even without any FX. It's worst when an FX is on (normal)
Quote from: fokof on June 19, 2009, 10:18:01 AMEDIT: curious to know what it is on the VG99 ?
Quote from: fokof on August 01, 2010, 02:17:04 PMNice to see you use DP too
Quote from: fokof on October 10, 2010, 02:51:59 PMWhat's nice is the flexibility to take the USB signal anywhere in the chain.
QuoteI would love to try throwing a valve preamp in the chain!
Quote from: shamael on January 27, 2011, 07:29:16 AMIf only they had done the same with an analog loop... I would love to try throwing a valve preamp in the chain!
Quote from: gumtown on January 27, 2011, 02:02:05 AMDoes the difference in latency between mag & modelled sounds change as you move up the scale in pitch. I would suspect that part of the time would be for pitch tracking or something, so as the frequecy increases,the peak to peak detection time is shorter (just like pitch to midi systems).Would a breakout of the mag signal before the VG-99 with a phase shifter stompbox pedal help?
Quote from: Elantric on January 27, 2011, 11:32:17 AMIf you ever used a Yamaha Digital Mixing board (O2R, O1V, etc) - you may have seen that every channel has its own user assignable Channel Delay in 0.1 millisecond increments.
Quote from: Elantric on January 27, 2011, 08:13:43 AMRead the GR-55 Missing Link thread for a new unit shipping soon that works with VG-99 and VB-99 that allows you to add many other FX in your "Normal PU" signal chain, in front of the VG/VB/GR processors. https://www.vguitarforums.com/smf/index.php?topic=2940.0