VGuitar Forums

LOOPERS => Boss RC-600 Looper => Topic started by: TechFixer on March 29, 2022, 04:05:40 AM

Title: Rc-600 Editor
Post by: TechFixer on March 29, 2022, 04:05:40 AM
I would really LOVE a system editor with templates for common setup scenarios like:
Single loop (play loop 1, then 2, then 3, etc)
Multiple loop (play loop 1, Add loop 2, Add loop 3, etc)
Combo loop (play loop 1, then 2, Add loop 3, etc)
These are all doable going through the menus but it's pretty tedious.
A visual system editor for Mac/Pc would be a huge help in getting up to speed!

Is there something out there for the 300/500/505 that could be modified for the 600?
I've seen the TouchOSC editor but I'm not savvy enough to design a template myself.

Thx,
Techfixer
Title: Re: Rc-600 Editor
Post by: admin on March 29, 2022, 01:11:44 PM
Quote from: TechFixer on March 29, 2022, 04:05:40 AM
I would really LOVE a system editor with templates for common setup scenarios like:
Single loop (play loop 1, then 2, then 3, etc)
Multiple loop (play loop 1, Add loop 2, Add loop 3, etc)
Combo loop (play loop 1, then 2, Add loop 3, etc)
These are all doable going through the menus but it's pretty tedious.
A visual system editor for Mac/Pc would be a huge help in getting up to speed!

Is there something out there for the 300/500/505 that could be modified for the 600?
I've seen the TouchOSC editor but I'm not savvy enough to design a template myself.

Thx,
Techfixer

same here!
Title: Re: Rc-600 Editor
Post by: nosfe on October 21, 2022, 01:42:04 AM
I consider it shameful that BOSS does not create an editor for pc / mac given the complexity of the machine
Title: Re: Rc-600 Editor
Post by: admin on October 21, 2022, 02:22:35 PM
Quote from: nosfe on October 21, 2022, 01:42:04 AMI consider it shameful that BOSS does not create an editor for pc / mac given the complexity of the machine

I was told the retail price would be higher if an editor was created for RC-600, as the long term cost of maintaining the editor on Win/Mac would negate profit.

Same holds true for GR-55 -

And sadly many Boss Customer support folks believe "Boss Tone Studio for RC-600" is an editor( which it isnt )
Title: Re: Rc-600 Editor
Post by: MooseTaylor on December 04, 2022, 03:31:16 AM
I'm writing an editor for the RC-600.
You'll be able to set all the values you can on the hardware, plus copy config and replicate to your other memory settings.
I think I'm a couple of months off releasing it.
I'm writing it for windows initially, but I'm using a cross platform environment, so theoretically it can be ported to mac, iPad, android etc.
If you go to the RC-600 Facebook group in the link

https://www.facebook.com/groups/1233551607122627/?ref=share

, I have a demo video of where I am currently at with it. I also have excel file stored in the groups files section that allows you to copy config between memory locations (I.e. set all the assigns based on the selected location)
Title: Re: Rc-600 Editor
Post by: admin on December 04, 2022, 10:09:30 AM
https://www.facebook.com/groups/1233551607122627/permalink/1487177968426655/?mibextid=Nif5oz


https://m.facebook.com/groups/1233551607122627/permalink/1487921875018931/?mibextid=Nif5oz
Title: Re: Rc-600 Editor
Post by: MooseTaylor on February 05, 2023, 01:57:54 AM
As an update, I'm getting closer to releasing my RC-600 Editor...
I'm still posting updates on the Facebook group listed previously, and I've created a website RC600Editor.com (Http://www.rc600editor.com) where you can register interest and then get the Editor when it's ready.
Cheers
Moose
Title: Re: Rc-600 Editor
Post by: admin on February 05, 2023, 10:13:04 AM
Quote from: MooseTaylor on February 05, 2023, 01:57:54 AMAs an update, I'm getting closer to releasing my RC-600 Editor...
I'm still posting updates on the Facebook group listed previously, and I've created a website RC600Editor.com (http://www.rc600editor.com/) where you can register interest and then get the Editor when it's ready.
Cheers
Moose

Add screenshots will motivate higher user count.

(https://www.rc600editor.com/img/memoryEditor.png)

(https://www.rc600editor.com/img/memoryManager.png)
Title: Re: Rc-600 Editor
Post by: MooseTaylor on April 13, 2023, 05:03:15 AM
(https://www.rc600editor.com/img/memoryEditor.png)

I've now released the RC-600 Editor for windows.
you can get it at https://www.rc600editor.com where you can download for free and see if it's something you are interested in.
If you like it, you can then unlock it using the app. (plus there's a purchase link on the website)

Anyhoo.... hope you get something from this.
cheers
Moose
Title: Re: Rc-600 Editor
Post by: Elantric on September 01, 2023, 11:30:22 PM