Hy everyone!
I've been using the ATG-1 for a few month now with my Godin xTSA and I noticed something that looks more like a firmware issue on the pedal: on all single coil emulations on guitars with 3 pickups (i.e. California, Lipstick), whenever the Neck+Middle pickup option is selected, the B and the E string sound filtered down, like a low pass filter on them, or more like the tone is rolled down a bit just for these two high strings. The other lower strings, E,A,D and G sound normal, with the proper amount of treble, it's just the two high strings that sound dull, like worn out strings. As soon as I switch to any other pickup emulation everything is fine, all strings have the same amount of treble, it's only on the Neck + Mid where I can hear this, and that's annoying because I really like the tone on this position.
Anyone else noticed this and if so, is there a known solution?
Many thanks!
Did you come to any conclusion? I'm a pretty big fan of the Strat 2/4 positions, and can make do with the mid+bridge tone in lieu of the neck+mid working correctly, but would love to know if there's a solution to this problem.
Did you re-check pickup height, etc.etc.? I had a weird issue and wrote a post about that in may, including my "solution".
https://www.vguitarforums.com/smf/index.php?topic=27065.0#msg198939
Bump, love to know more!
If GK pickup is closer than 20mm to the bridge saddles , the connected GK processor will not perform adequately- regardless of make/model.
https://www.vguitarforums.com/smf/index.php?topic=13322.0
Hi, Elantric! Wondering if your comment was specifically directed towards the neck + middle problem reported by the OP, or a general setup observation?