Started by Djonyses, October 22, 2020, 06:18:10 AM
0 Members and 1 Guest are viewing this topic.
Quote from: Djonyses on October 22, 2020, 06:18:10 AMTrying to get some info about DD200 midi controls. Is there any way to get the CC numbers for controlling the pedal switches from a midi device? I want to press the midi button rather than the pedal to set tempo or start/stop the looper. Anyone who can help?
QuoteIt's not the value that you change, it's the CC controller within the pedal that receives the messages. There are 127 possible controller "channels" that can happen on.Say you want to control the delay feedback. You set the CC number for feedback on the DD-200 to "001", then you would program your MIDI controller to send a CC message to "001" with whatever value between 0 and 127 you wanted the feedback to go to.If the MIDI controller has a rocker pedal, it should be able to continuously update the CC value to give you an expression pedal effect.There are MIDI CC controllers for each of the knobs on the DD-200 individually, but I'm guessing that if you connected an analogue expression pedal to the jack on the DD-200 you could set it to control multiple parameters simultaneously, not just delay time *or* feedback *or* mix level or whatever, so the MIDI CC controller for the expression pedal should be able to do the same.
Quote from: ravmitterhoff on June 15, 2022, 05:34:41 AMDoes anyone know how to send CC messages to turn the delay effect on and off? (in place of the left pedal switch) I see there is a parameter listed SAC as on/off switch CC but it does not seem to work or maybe I just do not know how to use it even though all the other midi commands I have set up work.