MeloAudio - MIDI Commander

Started by Elantric, October 26, 2017, 04:19:52 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

vtgearhead

Quote from: admin on June 20, 2021, 11:04:57 AM
My 1st gen MeloAudio MIDI Commander on MIDi Toggle mode - transmits either MIDI CC# value 0, (Off)  or MIDI CC# Value 64 (on)

Perhaps they updated this on latest Firmware 
https://cdn.shopify.com/s/files/1/0142/2137/7594/files/DFU_Package_190813.zip?571


Ah - yes.  In thinking about this again I realized that I'd updated the firmware prior to examining the output with a MIDI monitor.  Interestingly, there's no mention of this change in any of the release notes for the various firmware revs.

stevesilk51

Would be great for us users if Elantric would compile a MUCH needed editor for the Midi Commander.  I believe the sourcecode is available somewhere.

admin

#52
Quote from: stevesilk51 on October 20, 2021, 09:23:45 AM
Would be great for us users if Elantric would compile a MUCH needed editor for the Midi Commander.  I believe the sourcecode is available somewhere.

Its easy to program right on the unit

Be sure you have latest firmware

As as always, use a third party MIDI Monitor to verify desired MIDI messages are being sent

Working example
HOTONE MIDI COMMANDER with Ampero
https://www.vguitarforums.com/smf/index.php?topic=25331.0

admin

#53

pasha811

#54
Quote from: admin on May 10, 2022, 11:32:43 PM
MeloAudio MIDI Commander
Lots of new custom firmware options for third party MFX CONTROL
https://meloaudio.com/pages/manual


MeloAudio USER FORUM
https://meloaudio.com/community/champ


Open Source Firmware available for MeloAudio  - MIDI Commander
https://meloaudio.com/community/champ/forums/1764-frequent-questions-for-midi-commander/topics/25493-unofficial-open-source-firmware-finally-available

Thanks Steve!
I got one used for 50 last year and it works great as you suggested to me in another thread. I can control GP10*, VG99 and Ableton Live Looper instances! I'll look into those new options.. :-)

Paolo

* via Raspberry 3B.
Listen to my music at :  http://alonetone.com/pasha/


spyrl

#56
HXStomp firmware (dfu_package_v3_for_line6hx_stomp)

Pay it forward time because this took me way too long to accomplish as the Meloaudio web site seems permanently abandoned and the DFU upgrade too was a big pita to get working on Windows 11 (longer write up on that to come if there is interest). So, if you are looking for the HXStomp firmware (dfu_package_v3_for_line6hx_stomp) update for the Meloaudio Midi Commander or the Harley Benton Mp-100 or whatever they call it I found it at the following link at the very edge of the interwebs...

https://www-kikutani-co-jp.translate.goog/itemlist/20740/dfu_package_v3_for_line6hx_stomp/?_x_tr_sl=es&_x_tr_tl=en&_x_tr_hl=en&_x_tr_pto=wapp

I also found an updated manual in Japanese but would really like an english one if anyone has a copy out in vguitar land;
https://www.kikutani.co.jp/wp/wp-content/uploads/2018/11/MIDIcommander_manual_2022.pdf

the manual has links to files too;

ie; https://cdn.shopifycdn.net/s/files/1/0142/2137/7594/files/DFU_Package_V3_For_Line6HX_Stomp.zip?v=1610098413

   

Elantric

#57
Archive of last MeloAudio MIDI Products
http://web.archive.org/web/20221206062835/https://meloaudio.com/

PaintAudio is new company where former MeloAudio MIDI developers went
https://www.vguitarforums.com/smf/index.php?topic=35789.0

zztrydr

Hi everyone,
First post in the forum. I am using the MIDI Commander in HX Stomp mode to send commands to my Stomp, and one thing I noticed is that with Key4, instead of sending MIDI CC# 70 (All Bypass) to turn the bypass on/off it is sending CC# 52 to trigger FS4.

I've been planning to get another dual footswitch to connect to the Stomp's EXP 1/2 (FS 4/5) jack to add 2 more switches to assign in stomp mode. Problem is, it will be a bit redundant since Key4 in the MIDI Commander will have the same function as one of the switches.

I've been trying to configure one of the custom modes to mirror the HX Stomp mode, but I can't wrap my head on exactly mirroring the settings albeit with some small tweaks. I don't even know how the HX Stomp mode was configured to do Bank Moves of 3 increments because in the manual the only options are 4x, 5x, 8x, and 10x.

I was wondering, is there any way to modify the Midicommander_line6HX3x_V5.dfu file so that I can just change Key4 to send a different CC#? I have been successful in extracting the S19, HEX & BIN files out of the DFU file by using DfuFileMgr, but that's about it. I have looked up how to interpret the HEX files, but the one I read had some assembly code outputs which are now gibberish to me since I gave up on it back in college like, 28 years ago :P

Any help would be appreciated. Thanks!

Brent Flash

Welcome to the group zztrydr!  :)

pasha811

So... owners of Meloaudio MIDI Commander are kind of stuck in.
A lot of abandoned links and I cannot find a way to manage DFU FW upload.
I am lucky latest update I did was ALL CC so I can use it and at least manually I can revert some of them to PC at least... but I have no manual. Is there someone with DFU, Firmwares and Manual on their drive (I didn't downloaded them to permanent location back in the day - lesson learned)

Thanks in advance
Paolo
Listen to my music at :  http://alonetone.com/pasha/

Elantric


zztrydr

Quote from: pasha811 on February 11, 2024, 02:15:28 AMSo... owners of Meloaudio MIDI Commander are kind of stuck in.
A lot of abandoned links and I cannot find a way to manage DFU FW upload.
I am lucky latest update I did was ALL CC so I can use it and at least manually I can revert some of them to PC at least... but I have no manual. Is there someone with DFU, Firmwares and Manual on their drive (I didn't downloaded them to permanent location back in the day - lesson learned)

Thanks in advance
Paolo
I have a copy of the all CC firmware, which includes the DFU application in the zip file. The last firmware that Meloaudio released was the one for HX Stomp, I believe. I also have a copy of the manual. If the links Elantric provided above are not working for you, I can upload it somewhere if you want.

pasha811

Quote from: zztrydr on February 11, 2024, 10:05:44 AMI have a copy of the all CC firmware, which includes the DFU application in the zip file. The last firmware that Meloaudio released was the one for HX Stomp, I believe. I also have a copy of the manual. If the links Elantric provided above are not working for you, I can upload it somewhere if you want.

Thanks! That would be great!
Listen to my music at :  http://alonetone.com/pasha/

zztrydr

I have uploaded the zip file here: Meloaudio

I just googled free file upload sites without registration and clicked on the Transfernow site. I was going to use my Google drive, but it's already at its 15GB limit (the max for free storage on google accounts). But if you prefer a different location for uploading the file, lemme know and I'll do so.

pasha811

Quote from: zztrydr on February 12, 2024, 11:43:39 AMI have uploaded the zip file here: Meloaudio

I just googled free file upload sites without registration and clicked on the Transfernow site. I was going to use my Google drive, but it's already at its 15GB limit (the max for free storage on google accounts). But if you prefer a different location for uploading the file, lemme know and I'll do so.

Hi the link expired (I was very slow - sorry) in any case THANKS! :) 
Listen to my music at :  http://alonetone.com/pasha/