JS10 and FS7 Foot Pedal?

Started by Darryn, February 18, 2024, 05:53:46 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Darryn

Hey all, am I missing something or is this not possible? Trying to use FS7 with JS10 to change guitar effects:

I have the TRS cable.
When connected to (powering via ac adapter) to JS10, Pedal A and Pedal B both change the guitar effects.
Neither of the lil LEDs illuminate

I cant seem to change the guitar effects to what I want. I think I need to change the patch but when I try that I get "Protected".

gumtown

Check the polarity is correct on the power supply,
also the switches on the side of the FS-7,
 if set to "latch", the leds should toggle on/off.
if set to "momentary", the leds should stay on while pressed.
The polarity mode will also affect the operation too, making the switches normally open or normally closed (this the preferred option for Boss effects).
Free "GR-55 FloorBoard" editor software from https://sourceforge.net/projects/grfloorboard/

Brent Flash


gumtown

I just double checked my FS-7 last night, the leds should light up either momentary or latched when each of the pedals are pressed.
I would suspect the power supply is not right, and the FDS-7 not working correctly because of that.
Free "GR-55 FloorBoard" editor software from https://sourceforge.net/projects/grfloorboard/