Pigtronix Infinity Looper : Watch out Roland

Started by aliensporebomb, January 28, 2012, 07:13:54 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

ctblaze

Good Sir,
as the link does not work any longer, and I have tried many other places:
Could I humbly ask you to provide the file once again?
Either in the Downloads section, or in your Google Drive (like the valuable other info you've put there, THANKS), or via email, whatever is easiest for you.
Thank you, any help much appreciated.

Best regards, C.T.

Quote from: aliensporebomb on February 18, 2022, 04:05:52 PMTry this - I placed the file on my server:
http://pod.podzone.org/LooperImage.img

I tried to upload it here as part of the message but it was too large so it should be on my server for as long as you might need it.

aliensporebomb

#101
Quote from: ctblaze on March 06, 2023, 08:28:39 AMGood Sir,
as the link does not work any longer, and I have tried many other places:
Could I humbly ask you to provide the file once again?
Either in the Downloads section, or in your Google Drive (like the valuable other info you've put there, THANKS), or via email, whatever is easiest for you.
Thank you, any help much appreciated.

Best regards, C.T.


Problem is my computer recently had its drive die.  I've rebuilt it with an SSD but my server is offline.  Trying to find a place to put that online.   Stand by.

Does this work?
https://www.dropbox.com/s/bjj91fw13x95cck/LooperImage.img?dl=0

My music projects online at http://www.aliensporebomb.com/

GK Devices:  Roland VG-99, Boss GP-10, Boss SY-1000.

ctblaze

Quote from: aliensporebomb on March 06, 2023, 10:13:54 AMDoes this work?
https://www.dropbox.com/s/bjj91fw13x95cck/LooperImage.img?dl=0
YES IT DOES, thank you!  I'll let y#all know whether this works for the Infinity 3 as well (since it's technologically almost the same, I do assume that).

aliensporebomb

I hope you don't brick it since this firmware predates the existence of the 3 by a number of years.

My music projects online at http://www.aliensporebomb.com/

GK Devices:  Roland VG-99, Boss GP-10, Boss SY-1000.

ctblaze

Well I'll use a fresh SD card and just see if it works... Firmware that boots sits elsewhere.
I'll also ask Pigtronix (not very responsive though it seems so far) for the procedure of exchanging the SD card on Inf. 3
Yet, I strongly suspect that the core/base of it, tech and code, is still the same as on original Infinity. I have both, BTW. Thanks again