GK Volume pot changes patch sound

Started by deano, April 24, 2013, 01:17:34 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

deano

Hi Guys

I have installed an internal GK kit , which on the face of things is working OK. However, on a couple of patches that I have split sounds on such as tenor-alto sax on the exp pedal, when I turn the volume down via the  volume control, it switches the sounds? There are no assigns in place which could create an issue. Any ideas.

Deano

mbenigni

If there are no assigns, then check the GK volume control setting and see if it is set to function as a crossfader.  If this isn't helpful, I'll try to provide more detail when I get home.

Elantric

#2
Use the GR-55 Floor board Editor app, save your problem patch and upload it here for others to review

There are several ways this could get clobbered.
Sounds like the GK Volume is mapped to a problem area - either in:

* The GK Vol Global System area 

or

* The Control Assigns Area

deano

#3
HI Guys- I checked out all of the assigns and the Global Vol system area without finding any conflicts that would create the issue. So to get around it I modified the patches and cleared it that way.

Thanks for the suggestions anyway.