BJ Devices MIDI Foot Controllers for Kemper, Axe-FX

Started by admin, September 14, 2016, 05:28:31 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

admin

http://bjdevices.com/en/


https://reverb.com/item/2943313-bj-devices-tb-12-midi-foot-controller





Large size (but still fits to rack case) universal MIDI controller with 12 rugged footswitches, two expression pedals input and 2 stereo relays output. Supports bi-directional communication with Fractal Audio processors, Kemper Profiling Amplifier, TC Electronic G-Major - displays preset name, tuner, IA state synchronization. Also will works as generic midi controller with any MIDI devices. Have a USB connector for firmware update and can be used for controlling your DAW on PC and MAC hosts.
12 fully customizable footswitches
12 bi-color LEDs showing active patches (presets) and IAs
Phantom powered (via MIDI)
Large alphanumeric backlit LCD screen (2 lines, up to 16 characters each)
30 internal banks in non-volatile memory
Each of the 30 banks can be individually named (bank name up to 12 characters)
4 programmable relay jacks
Jacks for 2 expression pedals
Preset names are displayed dynamically as they load and IA status LEDs show the active effect(s) of the currently loaded preset
Tuner support on the controller screen
Tap tempo support (tap-tempo CC message is sent upon repeated press of the corresponding preset button). And tap-tempo beat can also be displayed on the LED or screen, if target processor sends tap-tempo midi messages
Bank change support via bank change messages. This allows to control such devices as AXE-FX and VF1, where presets are organized into several banks
Two program change (PC) messages can be sent via different midi channels upon a single press of a footswitch
USB support. Controller firmware is user-upgradable. You can also control guitar-related software on your PC via USB
USB power support
Current bank number and MIDI channel is saved upon power off
Rugged and road-ready steel chassis
Size : 16.5 x 7 x 2.4 inch., weight : 4,4 lb.
Size(metric) : 420 x 180 x 60 mm, weight : 2 kg
Product Specs
Condition:Brand New Make:BJ Devices Model:TB-12Made In:Russia



Manual
http://bjdevices.com/manuals/manualtb12_en.pdf

sixeight

Nice device. Bi-directional. So it has correct LED states for parameter/AI states. Not sure if it will do this for Kemper as well.

Looks like I have some competition for my VController project. Luckily we support different devices...

whippinpost91850


whippinpost91850

#3
Nice device. Bi-directional. So it has correct LED states for parameter/AI states. Not sure if it will do this for Kemper as well.

Looks like I have some competition for my VController project. Luckily we support different devices...

Just wished your VController project  supported Kemper :'(

Elantric

#4
http://www.thegearpage.net/board/index.php?threads/can-kemper-save-chappers.1745245/page-5#post-22657256

..... and to totally endorse Sergei / BJ Devices .... I have been using his TB-12 with my Kemper for ages and it is ASTONISHINGLY fantastic ☺ It will pretty much do anything you want already and it is ridiculously inexpensive .... seriously, if you have a Kemper and don't want to spring for the KPR due to its cost or its non-customability .... then the TB-12 is your answer..... works just as awesomly with an Axe 2 .... I use it with both my Kemper and Axe ☺




This document below is valuable as it lists all Kemper NRPN Values for the the KPA Looper and Tuner
http://bjdevices.com/manuals/manualtb12_en.pdf

sixeight

QuoteJust wished your VController project  supported Kemper :'(

Three scenarios :
1) I will sell 200 VControllers and buy one from the profits.
2) someone in the Netherlands will borrow me a Kemper for a couple of weeks
3) someone will the programming skills and a Kemper will, buy/build a VController and add the support.

sixeight


Sergey Burenkov

Quote from: sixeight on September 14, 2016, 07:22:28 AM
Three scenarios :
1) I will sell 200 VControllers and buy one from the profits.
2) someone in the Netherlands will borrow me a Kemper for a couple of weeks
3) someone will the programming skills and a Kemper will, buy/build a VController and add the support.
Hi sixeight!
First of all - VController project is very cool!
About Kemper support - you definitely no need to have a Kemper to support it, you can use our open source library https://github.com/BurenkovS/bjdevlib/
You can find out some necessary things in KPA specific driver https://github.com/BurenkovS/bjdevlib/tree/master/tbseries/vendors/kemper_amps
Best midi controllers over the world :)

www.bjdevices.com
www.facebook.com/bjdevices
www.instagram.com/bjdevices

batman

I very seriously looked at this for my Axe-FX but it's severely limited in the midi department (as I need to control a GP-10, loop switcher and possibly Strymon Timeline on separate midi channels).  FYI I went with one of these which can send 8 messages per press.  It also does cool stuff like different messages for press or press-and-hold, or on press/release of a button.  Also compatible with the Axe-FX tuner.
http://www.morningstarfx.com/

sw9nn

Hi! Will this controller work correctly with Roland VG-99? In particular, switching between assigned patches and expression pedal.

admin

https://bjdevices.com/en/catalog/midi-controllers/tb-6p-mkii-midi-kontroller-s-pedalju-jekspressii

Small size MIDI controller by BJ Devices with built-in expression pedal.

Perfect for Fractal Audio, Kemper Profiling Amplifier and many other guitar processors. MKII version have additional memory and therefore has expanded functionality in comparison with the previous version of devices.

Rating:   
Available:1 pcs.
Weight:1.90 kg
Dimensions (L х W х H):305 x 180 x 68 mm
Number of footswitches:6
Built-in expression pedal:yes
$265.00 In stock
+-
1

Features
Download
Video
Reviews (2)
TB-6P MK II is an updated version of the compact midi controller with an expression pedal. We added internal memory IC to store more parameters, which allowed us to implement many user requirements in the new firmware version.

Built-in expression pedal with multi-functional backlight and the ability to display a tuner on the pedal
6 buttons with fully customizable functionality
5 two-color LEDs for the indication of the active preset channel and effects
16x2 alphanumeric backlit LCD display
more than 100 banks of settings stored in non-volatile memory
4 programmable relay outputs that simulate a latching or momentary  button
Connection up to 2 external expression pedals
Transfer up to 4 Program Change (PC) midi messages on different midi channels with a single button push
Support Control Change, NRPN, Note ON/OFF mide messages.
Sending effects state right after switching to a new preset in case effects states cannot be obtained from the processor
Display tuner, presets names, TAP-TEMPO when working with effects some processors. AxFx, Kepmer Profiler, G-major are suported. The list of supported processors will constantly expand
Sending separate CC message for TAP-TEMPO (message is sent by pressing the button of the active channel)
USB interface for firmware upgrade. Also, using the USB interface, you can control the "guitar" software on your PC
Routing midi messages in any combination between MIDI and USB ports
USB powered
Support for phantom power via MIDI
Automatically save current bank number and channel when power off
Reliable and comfortable steel case


Dimensions without packaging (mm): 305 x 180 x 68

Weight unpacked (kg): 1.9



Package contents:

MIDI controller
Power Supply
USB cable 1m
Expression Pedal Adjustment Key
Warranty card
Payment And Delivery Warranty Download Community Contacts
Terms and Conditions Privacy policy        © BJ Devices, 2021Continuing surfing of this site means you agree with its using of cookies OK, d