Author Topic: BILLBAX_UK - mini GK 13 breakout cable.  (Read 1123 times)

0 Members and 1 Guest are viewing this topic.

Offline Elantric

BILLBAX_UK - mini GK 13 breakout cable.
« on: July 16, 2014, 10:43:25 AM »
http://www.separate-strings.co.uk

Latest mini breakout cable. 16 inches length.
« Last Edit: March 18, 2015, 04:17:04 PM by admsustainiac »

Offline mbenigni

Re: Bill Bax's mini GK 13 breakout cable.
« Reply #1 on: July 16, 2014, 10:59:08 AM »
Would be fun to have one of these to do some KPA profiling of GR55 COSM.  The cost is a tough pill, however.  Not to say it isn't a fair price - even acquiring a spare GK cable to cut up and break out myself is cost-prohibitive.

Offline billbax

Re: Bill Bax's mini GK 13 breakout cable.
« Reply #2 on: July 16, 2014, 11:38:47 AM »
Hi mbenigni,

The cable is my most cost-effective separate strings solution to date.  Priced at £75.00GB, plus trackable shipping of £15.00GB. 3 years guarantee included.  Thanks for the comments anyway.

MINI BREAKOUT CABLE

1  13-Pin line-socket. GK pickup input for recording separate strings. V-synth input with re-amping, re-guitar and re-synth etc.
2  13-Pin GK pre-amp power cable (3M).  Connects to a v-synth (power) or an optional dual 7-9vdc PSU.
3  Separate string output/input jacks (including Pin-7 normal guitar).  XLR and phonos are an option.
4  Extremely durable oxygen-free-copper cable for separate string signals. Fully shielded. Very low cable resistance. 40cms / 16" length. 
5  Pin-8 ‘Phantom power’ with internal in-line socket resistors. Pin-8 allows access to a Roland GR-55 synth voices. Thanks to Elantric.

Price: £75.00GB plus trackable shipping.  3 years warranty with RTB.

Regards,

Bill Bax
http://www.separate-strings.co.uk
« Last Edit: July 16, 2014, 11:45:19 AM by billbax »

Offline mbenigni

Re: Bill Bax's mini GK 13 breakout cable.
« Reply #3 on: July 16, 2014, 11:43:13 AM »
Thanks, Bill.  I hope I was clear in saying that I do recognize that your price is fair - and it looks like a great product.  At this point, any GK cable is a big expense for me.

Offline Elantric

Re: BILLBAX_UK - mini GK 13 breakout cable.
« Reply #4 on: March 02, 2016, 05:40:16 PM »
For Re-Guitaring - Its typically best to have access to a Audio Interface that features at least 6 Analog Inputs and 6 Analog outputs

Since many folks no longer use a computer with a PCI slot
http://www.eetimes.com/author.asp?section_id=36&doc_id=1320272

 - i get similar functionality with a USB Audio interface that supports Isochronous data transfer  = low latency.
http://www.edn.com/design/consumer/4376143/Fundamentals-of-USB-Audio

 Scarlett 18i20
https://us.focusrite.com/usb-audio-interfaces/scarlett-18i20




Or MOTU 828 Mk3
http://www.motu.com/newsitems/828mk3-wins-most-badass-interface-award
http://www.motu.com/products/motuaudio/828mk3




Then you can take advantage of advanced Gk13 techniques like Re-Guitar-ing / Re-amping with GR-55 or VG-99



http://www.separate-strings.co.uk/





« Last Edit: March 02, 2016, 05:50:06 PM by Elantric »

Offline admsustainiac

Re: BILLBAX_UK - mini GK 13 breakout cable.
« Reply #5 on: May 03, 2016, 06:18:50 PM »

http://www.separate-strings.co.uk
Short preview. GR-55 Re-Amping, Re-Guitar and Re-Synth.
Minimum requirements: V-guitar breakout cable. Alternatively, use a re-amping breakout box with an 8 I/O DAW interface - assuming you already have a v-guitar setup.

SEPARATE STRING PROCESSING: DC-Offset / Normalize / Noise Gating / String Inverting.

SEPARATE STRING SOFTWARE EDITING: Split / Copy / Paste / Move / Delete / Volume / Re-Tune / Reverse / the universe...AND the perfect take etc.

Cheesy tune, but thanks for listening,

Bill Bax
http://www.separate-strings.co.uk
Category
Music