normal pick ups do not work

Started by tommy h, July 25, 2014, 04:44:20 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

tommy h

Hello,I recently bought another brian moore , this one is a  c90 .13 custom shop, i had issues with it and had pat cummings fix it. Tonite i tried to just run the pickups in normal mode (no pcms running )   threw the  GR55...I can only hear the 2 low strings,none of the others are producing any volume ,Ive owned the gr 55 for a while,so i think I know the basic's. but i'm really hoping i'm missing something here.   Thanx   tommy

http://www.iguitar.com/customshop/CustomShopModels.asp?guitar=C90P.13


gumtown

Does it do the same on other GR-55 patches,
as only 2 strings indicates you are running modelling tone only with the other 4 strings levels down.
Normal pickup setting would give all 6 strings or none.
Free "GR-55 FloorBoard" editor software from https://sourceforge.net/projects/grfloorboard/

tommy h

hey gumtown, it's been a while. ive been out in the garage trying to rectify the problem, which I have done, unfortunately I do not know why. ???  I'm running the guitar threw the gr55 out to a pa ,as well as a gt 10 to a laney amp. What is very strange is I could not get regular guitar sounds without using a 1/4' jack from the guitar into the gt 10(and then out to the laney).    I tried running the guitar out on the gr55 into the imput of the gt 10, but i would get no sound out of the laney.  Right now i'm quite tired,perhaps with a good nite sleep,I will know what I was doing wrong,  so it's all good right now, and thank you for the quick response      tommy