GP-10 - best setup with GP-10 + TC Helicon Play Acoustic ?

Started by karinhougaard, November 20, 2017, 01:57:33 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

karinhougaard

I apologize in advance for this stupid question I am starting to play around with my GP10 considering to use some of the patches in a live set-up. Currently, I have the GP 10 and a TC Helicon play acoustic and a BossFS-6. I would like to alternate or even combine the effects from the two different units. Is this possible without replugging etc while on stage? ANY advice much appreciated. :-[

gtlist

You can get pure guitar signal from the guitar out jack of the gp10. So this is my signal chain order.
Guitar sound chain ;;; Guitar > 13pin cable > Gp10 > Aer pocket mixer > Main Mixer.
for Voice harmony sound chain : Guitar > 13pin cable > Gp10 > guitar out jack(not main out) > guitar input of the voicelive3 >Main Mixer.

And there is two input in the Aer pocket mixer. channel A connect to the Gp10, Channel B connect to the guitar out of the voicelive3. and toggle switch can choose 
A or B or AB together.


Good luck..

Fender Stratocaster American Deluxe hss with gk3.Tom Anderson Atom wraparound bridge.
Tom Anderson Crowdster plus+ with gk3.
Steinberger GTPro hsh with sustainer pu and Gk3
Taylor 814CE,   Taylor GS Mini, Epiphone masterbilt dr500mce, martin xt1
Roland Gp-10, voicelive 3, Boss Sy-1000