VGuitar Forums

Boss SY-300 Guitar Synth => Boss SY-300 Patch Exchange => Topic started by: Belewguitar on July 01, 2016, 03:44:30 PM

Title: SY-300 - Need a certain sound?
Post by: Belewguitar on July 01, 2016, 03:44:30 PM
I'll try and help you make a sound that you need!!! I'm trying to get really good at programming this thing, so that would help!! Let me know if you have any ideas!
Title: Re: SY-300 - Need a certain sound?
Post by: kinkyroy on July 07, 2016, 12:32:10 PM
MAKE MY DAY https://www.youtube.com/watch?v=Z8uVLfQwe_M (https://www.youtube.com/watch?v=Z8uVLfQwe_M)
Title: Re: SY-300 - Need a certain sound?
Post by: Rhcole on July 07, 2016, 12:59:23 PM
Hmmm...

Did you see my Electric Piano Challenge posting?
Title: Re: SY-300 - Need a certain sound?
Post by: kinkyroy on July 07, 2016, 02:48:30 PM
so? can you give me tsl ?
Title: Re: SY-300 - Need a certain sound?
Post by: Elantric on July 07, 2016, 03:01:48 PM
Quoteso? can you give me tsl ?

search Rhcole's posts
https://www.vguitarforums.com/smf/index.php?action=profile;area=showposts;u=721 (https://www.vguitarforums.com/smf/index.php?action=profile;area=showposts;u=721)

there is a lot of teasing about SY-300 Electric Piano patches  - but nothing posted yet
https://www.vguitarforums.com/smf/index.php?topic=18589.msg132442#msg132442 (https://www.vguitarforums.com/smf/index.php?topic=18589.msg132442#msg132442)
QuoteAnyway, I have made and deleted a few electric pianos from my system. The problem as I see it is that you can get pretty good lead or mono voices, but the poly voices when set to an epiano sound tend to shred and sound bad. I presently have an epiano that just doesn't stand up well next to EHX's Key9. That's my standard of comparison.
Title: Re: SY-300 - Need a certain sound?
Post by: gumtown on July 07, 2016, 03:25:52 PM
The synth bass tones are obtainable,
but I think you will get best results starting off with an actual bass rather than a guitar.
Title: Re: SY-300 - Need a certain sound?
Post by: Rhcole on July 07, 2016, 04:17:22 PM
Elantric,

No EP patches posted yet because Quality Control rejected them and sent them back to engineering.

A few of the testers died horribly, it was an awful scene. Covered up appropriately, pay no attention to what you read on CNN.
Title: Re: SY-300 - Need a certain sound?
Post by: Belewguitar on July 07, 2016, 11:16:56 PM
I think it's close.
Title: Re: SY-300 - Need a certain sound?
Post by: Tonemasterus on July 08, 2016, 03:04:32 AM
What about the synth in the cars song "let's go" or "just what I needed"?
Title: Re: SY-300 - Need a certain sound?
Post by: Brak(E)man on July 08, 2016, 03:08:29 AM
Pat Metheny's signature Gr300 sound with octave rise and a possible 5th voice
Title: Re: SY-300 - Need a certain sound?
Post by: kinkyroy on July 08, 2016, 07:34:09 AM
Quote from: Belewguitar on July 07, 2016, 11:16:56 PM
I think it's close.

Its nice thanks. however i need more wah kindya feel like. with the tone of the bass and the bass feeling sound like octaver pedal, I cleaned the sound little and for some reason I didnt found how to make it more wah moog feel wet

can you help me with this ?

R
Title: Re: SY-300 - Need a certain sound?
Post by: Belewguitar on July 25, 2016, 02:15:49 PM
Hey KR, I'm sorry i've been away. I'll try and mess with this. To my knowledge he's using an envelope at the beginning of the sound, the other thing I think this patch has going on is glide, which makes it very legato and it almost seems as if its swelling into the next note...
I'll try again!!
Title: Re: SY-300 - Need a certain sound?
Post by: jerryfie on August 06, 2016, 05:01:06 AM
Hi everybody, just got a SY-300 from Roland Canada to test out, wondering if there is a nice Geddy Lee-type Jazz Bass patch that would work on the entire six strings without dying out on the highs! Driving this with a Gibson SG. Thanks :)
Title: Re: SY-300 - Need a certain sound?
Post by: Scurry on September 07, 2016, 01:55:12 PM
I need more like the Dripstone factory patch!
Title: Re: SY-300 - Need a certain sound?
Post by: baga on September 08, 2016, 06:14:59 PM
Hi ther! I have some questions and I would like to call for help:
1. How could I achieve a good 8 bit/chiptune sound like this? https://www.youtube.com/watch?v=tmkeCGDcaVM
2. How could I achieve a good theremin sound?
3. Here's a little part of a synth sound from an original I'm trying to reproduce on the pedal. https://clyp.it/h3daxesa
Back when me and my band recorded it in studio, we used an old Fender synth, but I'm pretty sure I can achieve something similar on the SY, but I have no idea of how!
Thanks in advance and sorry for all these requests!  :o
Title: Re: SY-300 - Need a certain sound?
Post by: bsd on September 15, 2016, 08:54:16 PM
Quote from: Belewguitar on July 01, 2016, 03:44:30 PM
I'll try and help you make a sound that you need!!! I'm trying to get really good at programming this thing, so that would help!! Let me know if you have any ideas!

Would love to get something close to this sound at 2m30s in:

https://youtu.be/ScJvQhWL7Lg?t=2m20s

Title: Re: SY-300 - Need a certain sound?
Post by: Witness on September 20, 2016, 01:28:29 PM
Want to try and tackle this one?

Looking for the bass sound after 1:30

https://www.youtube.com/watch?v=Obv477QfDI0
Title: Re: SY-300 - Need a certain sound?
Post by: nobo on November 03, 2016, 04:27:25 AM
simple (but fat, large band) Auto-wha pleaaaase :)
Title: Re: SY-300 - Need a certain sound?
Post by: Belewguitar on November 03, 2016, 07:35:28 PM
AAAAAANNNNNNDDDD I'm back.
Sorry music school has been quite time consuming. I'll start working these out!
Title: Re: SY-300 - Need a certain sound?
Post by: Sirkreuab on January 12, 2017, 02:28:40 PM
I would like to add a second vote for a good chiptune sound
Been trying to make a good classic Nintendo sound also anamanaguchi has some great tracks that ground is lava song was very cool

Endless fantasy is probably my fav chiptune album ever


https://youtu.be/euTyRhnqFtA
Title: Re: SY-300 - Need a certain sound?
Post by: Wetterstein on March 20, 2017, 11:47:15 AM
Hi! Yes would be nice if you can programm the sound of a Sitar....Thanx and greetings Hary   (wetterstein@hary.at)
Title: Re: SY-300 - Need a certain sound?
Post by: mariomacc on May 02, 2017, 11:56:03 PM
A rickenbaker 360 12 strings would be very appreciated  ;D

thx
Title: Re: SY-300 - Need a certain sound?
Post by: Rhcole on May 02, 2017, 11:59:49 PM
QuoteYes would be nice if you can programm the sound of a Sitar.


QuoteA rickenbaker 360 12 strings would be very appreciated  ;D

You need a GP-10 and a hex guitar.  :-\
Title: Re: SY-300 - Need a certain sound?
Post by: soufedj on December 08, 2017, 02:17:08 AM
I would like to know  if it is possible to get a Clavinet clean sound, or Rhodes/ Wurlitzer?

Also, the sound of the synth in this song:
https://www.youtube.com/watch?v=Pkw62c0SlC4

Thanks
Title: Re: SY-300 - Need a certain sound?
Post by: Rhcole on December 08, 2017, 08:37:46 AM
No on the Clavinet and Rhodes. Yes on the synth in the song, maybe start with a Triangle wave.
Title: Re: SY-300 - Need a certain sound?
Post by: anlwpi on December 30, 2017, 10:54:01 AM
Can you split the "Craftwork" preset into the two sounds it produces (one main one based directly on what you play, and the second one that plays on top of that)?
Title: Re: SY-300 - Need a certain sound?
Post by: anlwpi on January 01, 2018, 09:47:21 PM
Sky Ferreira's Everything's Embarrassing chorus synth?
Title: Re: SY-300 - Need a certain sound?
Post by: davecadieux on August 19, 2018, 10:04:05 AM
looking for a patch (or tips to try to create my own) for acoustic emulator (laying an ibanez artcore semihollow AM53)

any ideas ?
Title: Re: SY-300 - Need a certain sound?
Post by: Vmark on March 25, 2019, 04:46:26 PM
Has anyone made an harmonica or flugelhorn sound yet?
The kind that the Roland GR-1 has?
Title: Re: SY-300 - Need a certain sound?
Post by: admin on March 25, 2019, 04:48:10 PM
Quote from: Vmark on March 25, 2019, 04:46:26 PM
Has anyone made an harmonica or flugelhorn sound yet?
The kind that the Roland GR-1 has?

SY-300 is the wrong tool for that


need a GR-1, GR-50, GR20, GR33, GR55 with PCM tones to achieve that

while the SY-300 lacks PCM tones, so it will be restricted to more of a primal late 1960's / early 70's  early Synth tones / drones  -  - like Edgar Winter Frankenstein

https://youtu.be/bcFos5SMabo
Title: Re: SY-300 - Need a certain sound?
Post by: jipegonzo on April 03, 2019, 07:32:42 AM
i'm looking for a oud sounds.. :o) any help ? thanks ! jp
Title: Re: SY-300 - Need a certain sound?
Post by: carlb on April 03, 2019, 10:39:08 AM
SY-300 is going to be the wrong tool.

Personally, I'd try the VG-99. Mix the nylon string guitar model with the sitar model. Sitar model with the buzzing parameter low or off.

Between that, "oud-like" tuning and phrasing, would be able to get a pretty convincing oud.

GP-10 would be good too, but would have to stick to just the nylon string model. Maybe add hints of twelve-string octave intervals to bass strings. Again "oud-like" tuning and phrasing would be key.
Title: Re: SY-300 - Need a certain sound?
Post by: admin on April 03, 2019, 10:44:42 AM
There are  OUD User presets for GR-55 here
https://www.vguitarforums.com/smf/index.php?topic=4333.0

But I agree  - its going to be tough to get similar OUD tones on SY-300
Title: Re: SY-300 - Need a certain sound?
Post by: Brak(E)man on April 04, 2019, 02:01:17 AM
I've made an oud patch for GP-10
It's far from perfect and more like a electric oud
But it works.

https://www.vguitarforums.com/smf/index.php?topic=18415.msg131280#msg131280
Title: Re: SY-300 - Need a certain sound?
Post by: Dougal.fr on July 25, 2020, 02:25:18 AM
Dancing in the Dark by Bruce Springsteen. Probably an easy one but I can't get it right. It's the lead tone, main riff. Any help would be great👌
Title: Re: SY-300 - Need a certain sound?
Post by: Mrs Smiths Mother on July 26, 2020, 09:26:54 AM
Hi, can anyone make it so when you play one string it triggers one of the oscillators set to noise through the random wave form LFO's to produce a background wind noise that can be stopped by using one of the CTL foot switches.

It does not really matter that if playing single guitar strings as in the solo retrigger it at different frequencies because the VCF and VCA settings can create a slow ramp in of differing notes, adding to the swirling wind effect.

I'm trying to mimic Pink Floyd's Shine on you crazy diamond parts 6-9 on what was side 2 of wish you were here.

Alternatively how do you produce a single note drone that you can play over it? If I knew how to do this I could probably work out how to do the wind noise by experimentation...
Title: Re: SY-300 - Need a certain sound?
Post by: BillBzak on January 12, 2021, 05:17:17 PM
If its even possible on this machine, I love a patch that can do the intro filter sweep synth sound from Rush's Tom Sawyer

Thanks in advance to anyone who can give it a go!

Bill Bzak
Title: Re: SY-300 - Need a certain sound?
Post by: GarryGlue on February 25, 2021, 09:50:42 AM
Hi, could you try to make the bass (stick) sound of first song?
https://www.youtube.com/watch?v=cD5WTqnVOtc&t=1663s

Thanks
Title: Re: SY-300 - Need a certain sound?
Post by: anttileinonen on August 13, 2021, 07:55:13 AM
Is it possible to create something close to hammond organ?
Title: Re: SY-300 - Need a certain sound?
Post by: admin on August 13, 2021, 08:44:18 AM
Quote from: anttileinonen on August 13, 2021, 07:55:13 AM
Is it possible to create something close to hammond organ?

https://www.vguitarforums.com/smf/index.php?topic=22766.msg165834#msg165834
Title: Re: SY-300 - Need a certain sound?
Post by: CraigGorsuch on October 22, 2021, 03:06:17 PM
Would love to approximate the Crystallizer plug-in.
Like what Jeff Schmidt uses in this video
https://www.youtube.com/watch?v=aZH99St4HGk

Also something like what Steve Vai is using on the 12-string neck in the "I Know You're Here" video.
Starting at 4:48, also at 6:47, also at 8:58 when Jeremy is holding the chord shapes for Steve
https://www.youtube.com/watch?v=jY8wyKuLY2k