Latency for certain amp models on gt-001

Started by ioscommuter, June 25, 2016, 04:10:18 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

ioscommuter

I am connected to tone studio on osx, sending audio via usb to ableton, and using a patch which uses a rectifier as preamp a and an ms 1959 I+II as preamp b. I notice significant latency on the ms 1959 I+II.
This latency is on the signal to the audio out of the gt-001.

Questions:

Have others experienced similar latency issues?
Are there specific settings on the gt001 which reduce this?
Are there certain models or effects which are to be avoided due to their latency?
Does it get better when doing fewer things simultaneously, for example only 1 amp?
Is there a difference with GT100 over GT001 with latency? Does the GT001 have less DSP available by comparison?






gumtown

Try with the USB cable disconnected, the USB routing might be placing load on the DSP.
Free "GR-55 FloorBoard" editor software from https://sourceforge.net/projects/grfloorboard/

ioscommuter

I will try it with the usb disconnected to see if thats the case, but i think for me the ability to record the signal by usb is a key feature of the unit.