VGuitar Forums

Boss GP-10 V-Guitar System => Boss GP-10 Examples => Topic started by: mccorp on August 16, 2017, 06:58:00 AM

Title: GP-10 - Using the Rotary FX with GP-10
Post by: mccorp on August 16, 2017, 06:58:00 AM
I am trying to use the Rotary Fx with Ctl1 and Ctl2 switches so that I can have access to the slow and fast rotary on the same patch. Can someone explain the settings for me? I just can't seem to get it to work.
Title: Re: Using the Rotary FX with GP-10
Post by: Redvers on August 16, 2017, 07:18:43 AM
They're the same parameter, like an on/ off switch so you only need to assign it to one switch and alternate between 0 / 127. From what j remember.
Title: Re: GP-10 - Using the Rotary FX with GP-10
Post by: admin on August 16, 2017, 07:53:26 AM
For more FX programming and Control Assignment  details read


Learn to Program Roland/Boss MultiFX Processors

https://www.vguitarforums.com/smf/index.php?topic=88.0
Title: Re: GP-10 - Using the Rotary FX with GP-10
Post by: Cups on August 16, 2017, 12:00:12 PM
Use ctrl 1 to switch rotary on/off than use the assign to switch the fast/slow. You can use whatever switch you like. May I suggest using the gk1 switch. It frees up your stomps.
Title: Re: GP-10 - Using the Rotary FX with GP-10
Post by: mccorp on August 18, 2017, 04:32:57 AM
Thanks to Redvers and Cups for the suggestions and as always to Admin for the link.  :)