Recent Posts

#1
Well done! The M1 PWM output is only 3.3V, though, so it might not cover the full range of 5V systems like Boss ?

The first batch of CV Adapters was finished a long time ago. It has selectable 3.3V, 5V, and 9V outputs, just like the M2.

However, there is a potential for user errors, such as plugging in the wrong jack or setting it incorrectly in the TRS settings menu, that could accidentally result in unwanted 9V output. (The M2 doesn't have this problem since it's built-in).

I had to redesign it to include only 3.3V and 5V outputs (I think most people don't need 9V).
#2
TriplePlay General Discussion / cc66 problems
Last post by Madagascar - Today at 12:59:46 AM
Hi all
Is there any software solution to remapping sustain function cc?
I own a kemper and it only send cc1,47,11 via pedals as well as program changes via switches.
Thus it's seems to be impossible to trigger ftp sustain function
Any vsti that allow remapping of cc4 to 66?
Ive tried a bunch but none seem to have this
Some sort of remapping function in ftp would be a solution
thanks
#3
Very late to this...  I am in LA housesitting for my nephew, who composes & performs movie soundtracks.

This is all last minute, shortly after I got here he flew out to deal with family stuff.  So, with no introduction, I'm surrounded by fun tools, like a gorgeous Les Paul...

His first love was guitar, and he wanted to see if he could use midi guitar in composition.  He owns a Jamstik, which I am now playing thru my Android phone.

I can definitely see the appeal.  Although the latency is noticeable, it is slight, and importantly, very consistent, even on the low strings.

Glitches and mistriggers are rare, and when they happen, they are muted and quiet.  No mousie death squeals.

All the features you'd normally want, plus MPE.  E.g., it uses MPE "expression" to send more accurate guitar note decay info.  It's not just velocity & note on/off.

It's a completely different experience than Roland/Boss or even the FTP. 

The net result is very usable.  Even thru my cheapie android.
 
#5
Roland VG-88 Discussions / Re: LCD Screen Blank
Last post by billbax - Yesterday at 06:41:55 PM
Before you right it off, how about a few hi-res power supply photos.
#6
Quote from: Toddantho on Yesterday at 10:05:04 AMI like this trick , for using Ann exp with no toe switch!
I am wondering if I have a switch I could switch between Amp gain , and Wah. 
At any rate this good to know !
Yes you can.
For as many spare assigns you have, any parameter can be assigned to an EXP pedal, and its range changed over any specific pedal travel range.
#8
Roland VG-88 Discussions / Re: LCD Screen Blank
Last post by Elantric - Yesterday at 11:33:11 AM
Quote from: MTzadok on Yesterday at 10:31:33 AMMight be easier to just pick up a second hand one that is in working order.

Agreed- and seek a VG-88 that is confirmed to already have the VG-88 FW 2.00 upgrade preinstalled

Or shop for a gently used VG-99
#9
Quote from: Tutama on Yesterday at 07:53:43 AMIt's ok Brent Flash, I managed to find what I was looking for, thanks for your concern. I joined the forum thinking it would be easier to get help, but apparently I came to the wrong forum considering that it is supposed to be the biggest resource in Rolan equipment.
My mistake.

Stay well mate.  ;)  ;)
Sorry we couldn't help! Maybe when you have a question about something that is made by Roland we can help even though our membership owns just about every brand of gear you can imagine. The FCB1010 (made by Behringer) with all the hacks that people have used like UNO, Etc. can be a challenge. You are welcome to share what you found to maybe help others that have the same questions as you or not. Your choice, take care! :)
#10
The hurdle is many of us obtained the FCB-1010 when it was shipped with the far less capable Version 1.00 firmware, which had very limited capabilities and swiftly removed that IC chip and installed third party firmware.  I own two FCB-1010's none have factory firmware.( one has Eureka PROM. Other has Kemper Prom-  I have no experience  with the latest stock firmware to assist you. There are known bugs with many versions
https://fcb1010.groups.io/g/main/topic/75148654?p=,,,20,0,0,0::recentpostdate/sticky,,,20,2,0,75148654
https://fcb1010.groups.io/g/main/topic/75148654?p=,,,20,0,0,0::recentpostdate/sticky,,,20,2,0,75148654

Be sure to include your specific firmware version when searching google for FCB-1010 answers

Member "ossandust" is THE FCB-1010 GURU read all messages from him
https://fcb1010.groups.io/g/main/search?q=posterid:2713668


Try these links
FCB-1010 and V-Amp Pro
https://fcb1010.groups.io/g/main/message/29495
https://www.fcb1010.uno/

https://forum.fractalaudio.com/threads/new-option-for-fcb-1010-tiny-box.161881/

As always, follow this procedure to setup any  MIDI CONTROLLER
https://www.vguitarforums.com/smf/index.php?topic=2975.0