VGuitar Forums

MIDI Controllers / Interface / Tone Modules => FC-300 MIDI Foot Controller => Topic started by: ulfiyya on March 02, 2014, 06:04:45 AM

Title: FC-300 Polyphonic Key Pressure Message K.PRS
Post by: ulfiyya on March 02, 2014, 06:04:45 AM
Hi there!
Can some one tel me please why i can 't find the K.PRS on the FC 300.
CH.PRS is available , strange. In the manual i find it!
Thanks!
Title: Re: FC-300 Polyphonic Key Pressure Message K.PRS
Post by: ulfiyya on March 06, 2014, 10:09:41 AM
No one there?
Title: Re: FC-300 Polyphonic Key Pressure Message K.PRS
Post by: Elantric on March 06, 2014, 10:27:40 AM
Read FC300 Owners Manual Pages 33 & 35 (When Setting Channel Messages and Realtime Messages) for details on K-PRS (Polyphonic Key Pressure Message K.PRS)

Title: Re: FC-300 Polyphonic Key Pressure Message K.PRS
Post by: ulfiyya on March 06, 2014, 10:46:56 AM
Thanks for the answer.
But time ago i used the CH.PRS via midi was no problem until now if i use cc 1 hi works instead of CH.PRS why?
Title: Re: FC-300 Polyphonic Key Pressure Message K.PRS
Post by: Elantric on March 06, 2014, 11:44:05 AM
please refer to this MIDI Reference
http://www.midi.org/techspecs/midimessages.php (http://www.midi.org/techspecs/midimessages.php)