Midi out on ATG-1

Started by sec6, August 19, 2017, 09:19:23 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

sec6

I don't know if has been mentioned before, but the latest firmware update added midi out for program change messages.  So if you have a device such as a GI-20 or GP-10, you can setup your patches to mirror your alt-tunings presets. 

80Hz

So is there any way to get the firmware update?    I emailed Antares and got no reply.  I bought a new "old stock" one recently but it is  OS 2.7   I REALLY WANT MIDI OUT!

admin

#2
Quote from: 80Hz on March 01, 2020, 07:05:47 PM
So is there any way to get the firmware update?    I emailed Antares and got no reply.  I bought a new "old stock" one recently but it is  OS 2.7   I REALLY WANT MIDI OUT!

Afaik - Antares firmware updates ceased in 2016

MIDI out (Note on Note Off messages to drive synthesizers ) was still in progress .., but never finalized before the developer retired

GuitarBuilder

I was intrigued, so I pulled out my ATG-1 and tried it out!

I get MIDI Out data on Channel 1 when in Preset mode, with Bank 1 Preset 1 being 1, Bank 2 Preset 1 is 9, etc., all the way to Bank 8 Preset 8 as 64.

There is no MIDI data transmitted in Control mode.

Hope this helps!
"There's no-one left alive, it must be a draw"  Peter Gabriel 1973

admin


Afaik - Antares firmware updates ceased in 2016

MIDI out (Note on Note Off messages to drive synthesizers ) was still in progress .., but never finalized before the developer retired