FV Level doesn't work

Started by pjwassermann, September 16, 2009, 01:38:53 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

pjwassermann

It's strange: Just with the Space Sitar patch the FV level doesn't work.

I assigned exp2 on the FC300 to FV level on both channels but nothing happens.

Probably some fault on my side but I just don't see it...

Any hints? Thanks
pjw

PJ Wassermann
http://www.pjwassermann.com/
Last album "Space Drone Salad": https://pjwassermann.bandcamp.com

Brent Flash

Make sure the CONTOL ASSIGN (EXP 2 light is on) is on and also make sure there is not another control assigned to the same target (FV).

pjwassermann

Even stranger: with other patches I normally don't use the switches on the FC300 and the FV level works.

I also routinely do double assignments on most patches as sometimes I only take the FV-5 with me instead of the FC300.

It doesn't make a difference if switch2 is lit. It should also be routed to FV level, I suppose.
PJ Wassermann
http://www.pjwassermann.com/
Last album "Space Drone Salad": https://pjwassermann.bandcamp.com

Brent Flash

I may not have explained it right. I meant to say make sure they are active. The controler you assigned. If you are in the editor it is the little light on the top left.

pjwassermann

I normally work on the unit itself but now I connected it. And yes, it's easier to see things in the editor: both were set on channel B!

Thanks for bringing me on the right track!
pjw

PJ Wassermann
http://www.pjwassermann.com/
Last album "Space Drone Salad": https://pjwassermann.bandcamp.com

Brent Flash

Great, I knew it was something simple I just did not think of you missing the target all together.  :P

Glad you found it.  :)

pjwassermann

It had been a bit late already...   :-\
PJ Wassermann
http://www.pjwassermann.com/
Last album "Space Drone Salad": https://pjwassermann.bandcamp.com