Author Topic: MS-3- EXP Pedal control extended functions  (Read 188 times)

0 Members and 1 Guest are viewing this topic.

Offline gumtown

MS-3- EXP Pedal control extended functions
« on: September 29, 2017, 07:50:20 PM »
I posted this as a tip on another site,
 but thought it might be of value to those that want to get the most out of their MS-3 using an EXP pedal.

 Another handy tip for an EXP pedal is to glue soft rubber pads under the toe and heel ends,
 normal EXP range does your regular control stuff,
 and a hard press at either end works like an EXP switch (which how the Boss gear with built in EXP pedal switch works).
 So your EXP normal range is 1 to 126,
 hard press one ends sends the EXP pedal range value to 0 the other end to 127.
 And set an Assign to toggle between EXP values of 0 & 1, and 126 & 127.
« Last Edit: September 30, 2017, 01:52:52 AM by Elantric »
Free "GR-55 FloorBoard" editor software from http://sourceforge.net/projects/grfloorboard/

Offline josbourn1

Re: MS-3- EXP Pedal control extended functions
« Reply #1 on: November 14, 2017, 04:34:40 PM »
very interested in this. so how does it exactly work?
what i want to do is go between foot volume and pedal bend or wah depending on patch without having to hit a footswitch. hope that makes sense.

thanks

Offline admsustainiac

Re: MS-3- EXP Pedal control extended functions
« Reply #2 on: November 14, 2017, 04:37:19 PM »
very interested in this. so how does it exactly work?
what i want to do is go between foot volume and pedal bend or wah depending on patch without having to hit a footswitch. hope that makes sense.

thanks

Learn about using multiple Control Assigns on the Expression pedal ranges
read all attached PDF docs

Learn to Program Roland/Boss MultiFX Processors
http://www.vguitarforums.com/smf/index.php?topic=88.0

« Last Edit: November 14, 2017, 04:40:50 PM by admsustainiac »


 

Blog