VG-99 Mag PU Only - Multi FX Stomp patch

Started by rolandvg99, May 02, 2014, 02:56:58 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

rolandvg99

A small general purpose patch I've made for my mag PU only guitars. I'm using the FC-300 in CC mode for this one. The FC-300 needs to be routed to the main unit for this one under System/MIDI/Routing RRC2.


I have also programmed the FC-300 using the following parameters:
CC 70-79 PDL1-10 Latching
CC 80 & 81 EXP1&2 switch Latching
CC7 EXP1 Pedal
CC1 EXP2 Pedal
EXP3-8 are using CC 20-25 for controlling my external gear. Momentary


The patch controls are as such
FC-300
PDL1 OD on/off
PDL2 OD change
PDL3 Uni-Vibe on/off
PDL4 Chorus on/off
PDL5 Delay on/off
PDL6 Compressor on/off
CTL1 Tap tempo
CTL2 AMP CHA&B Solo switch on/off
EXP1 Uni-Vibe speed (combined with Wah when wah is engaged)
EXP1 Wah position (When wah is engaged using EXP1SW)
EXP1SW Wah on/off


VG-99
F1 OD CHA Drive
F2 OD CHA Tone
F3 OD CHB Drive
F4 OD CHB Tone
F5 Delay level CHA
F6 Delay level CHB
CTL1 Tap AMP CHA&B GAin switch from low to mid
CTL2 Bright Switch AMP CHA&B
Ribbon Dealy feedback CHA&B


Smooth Jam
Mag Multi FX Demo
Much too much (and then some) Used on lead
Mix-O-Lydia Used on Riffing rhythm, solo and most outro fills.

I've also added the FC-300 SYSX files I use. Bevare that this will erase any customization done to your own FC-300.
To V or not to V: That is the question.

My little Soundcloud corner

baatkarlo

This is some brilliant work, especially on the FC-300. I had been wondering how to go about doing a stompable pedal chain, while using the regular PU from my acoustic or electric guitars. This patch and approach answers it.

One issue I have not figured out still is how to switch the FC-300 to CC mode without having to bend down while playing. But that's asking too much since you put in so much work into this patch already!
Thanks for sharing it! 
Eat sleep get up play. Eat sleep get up play. Eat sleep get up play.

aliensporebomb

My music projects online at http://www.aliensporebomb.com/

GK Devices:  Roland VG-99, Boss GP-10, Boss SY-1000.

rolandvg99

Quote from: baatkarlo on February 10, 2016, 02:39:19 PM
This is some brilliant work, especially on the FC-300. I had been wondering how to go about doing a stompable pedal chain, while using the regular PU from my acoustic or electric guitars. This patch and approach answers it.

One issue I have not figured out still is how to switch the FC-300 to CC mode without having to bend down while playing. But that's asking too much since you put in so much work into this patch already!
Thanks for sharing it!

I use a Boss FS-5U into the "Mode" socket of the FC-300. There is a function in the FC-300 settings to restrict the modes to Your liking. I have this set to switch between SysX and CC.
To V or not to V: That is the question.

My little Soundcloud corner

Breno

Fender Stratocaster, Ibanez AS200, VG-99, GR-55, FC-300 e US-20.

alexmcginness

VG-88V2, GR-50, GR-55, 4 X VG-99s,2 X FC-300,  2 X GP-10 AXON AX 100 MKII, FISHMAN TRIPLE PLAY,MIDX-10, MIDX-20, AVID 11 RACK, BEHRINGER FCB 1010, LIVID GUITAR WING, ROLAND US-20, 3 X GUYATONE TO-2. MARSHALL BLUESBREAKER, SERBIAN ELIMINATOR AMP. GR-33.