Author Topic: Must Have Accessory List for Mobile Guitarists  (Read 6615 times)

0 Members and 1 Guest are viewing this topic.

Offline Elantric

Re: Must Have Accessory List for Mobile Guitarists
« Reply #25 on: December 31, 2015, 12:29:38 AM »



Stagg Model GIST-300 Foldable Stool with Built in Guitar Stand





Gator G-GIGBOX2

Offline Taupo_Axeman

Re: Must Have Accessory List for Mobile Guitarists
« Reply #26 on: February 07, 2016, 03:12:37 AM »
Blu-Tack.
I use it for all analogue knobs or settings that can't be digitally saved.  E.g. Input gain on my Mackie DL1608, stomp box pedals, Amp settings.
Since I started this 10 years ago, I've never returned from a gig discovering a knocked dial/wrong setting ::)
Guitars: 1975 Strat, Godin XTSA, Maton Acoustic, Roland GC1
Amp:Tech 21 Trademark 60
P.A.: Mackie SRM 450's, 15 Mackie Active Subs
Floor: Boss GP-10, VG8 EX, VG-88
Studio: Logic Pro, Omnisphere, Korg Triton, Tria Event speakers
www.tasmanhoppers.com/music/

Offline Elantric

Re: Must Have Accessory List for Mobile Guitarists
« Reply #27 on: August 16, 2016, 12:55:09 PM »
These work 100% with modern micro Xotic / Joyo / Mooer Guitar FX that require external 9V power

https://www.amazon.com/dp/B01AXIEDX8/ref=cm_cr_ryp_prd_ttl_sol_23

5pack 9v Battery Clip with 2.1mm X 5.5mm Male DC Plug for Arduino by Corpco


Offline Elantric

« Last Edit: August 25, 2016, 05:35:16 PM by Elantric »

Offline admsustainiac

Re: Must Have Accessory List for Mobile Guitarists
« Reply #29 on: September 26, 2016, 03:42:10 PM »

This is a quick video showing the Behringer CT100 cable tester which tests a multitude of different cables. This is a no brainer for a church/venue to have at such a low cost. It is powered off of two AA batteries.

I test all of my cables about once a month to make sure everything is still functional. The intermittent function is very handy as you can jiggle a cable back and forth once connected into the CT100 to make sure the connectors have good conductivity.

If you haven't already, make sure to check out my new website https://dbbaudio.com for the latest news and updates!

This Pyle version below tests more cable types


Both include a Signal generator calibrated for -10dBu / +4dBu
https://www.amazon.com/dp/B004HJ545G/ref=pd_luc_rh_sbs_03_02_t_img_lh?_encoding=UTF8&psc=1


http://www.pyleaudio.com/sku/PCT60/13-IN-1-Audio-Cable-Tester-(Tests-14-(TRS)-18-(35mm)XLR-(3-Pin)XLR-(5-Pin)Speakon-(4-Pin)Speakon-(8-Pin)RCATTBantamRJ45USB-AUSB-BDIN-(3-Pin,-5-Pin,-7-Pin,-Or-8-Pin)DIN-(4-Pin)

Make sure your audio cables are working properly with the Pyle PCT60
Click here for a larger image
Supports all the most used cable types in the sound recording industry
Click here for a larger image
Affordable, Easy Way to Ensure Your Cables Are Working Properly

The PCT60 is an incredibly versatile 13-in-1 cable tester that quickly delivers accurate continuity information about many different kinds of cables. LEDs on the unit confirm each conductor’s continuity and connection. Also includes ground connection status check so you know the tester is accurate. Tests ¼” (TRS), 1/8” (3.5mm), XLR (3-pin and 5-pin), Speakon (4-pin and 8-pin), RCA, TT, Bantam, RJ45, USB-A, USB-B, DIN (3-pin, 4-pin, 5-pin, 7-pin, or 8-pin).

Rugged and Durable Design

Built in a strong, compact metal casing, the PCT60 is made to last, and is a great long-term solution to help keep your audio set-up running smoothly.

Supports All the Most Used Cable Types

With support for nearly every cable type in the sound recording industry, the PCT60 is your go-to for making sure your next performance goes off without a hitch. Or, you can do a little house cleaning and throw out any cable that's no longer working.

1/4'' (TRS)
1/8'' (3.5mm)
XLR (3-pin)
XLR (5-pin)
Speakon (4-pin)
Speakon (8-Pin)
RCA/TT/Bantam/RJ45
USB-A/USB-B
DIN (3-pin, 5-pin, 7-pin, or 8-pin)
DIN (4-Pin)
Product Description
The PCT60 is an incredibly versatile 13-in-1 cable tester that quickly delivers accurate continuity information about many different kinds of cables. LEDs on the unit confirm each conductor's continuity and connection. Also includes ground connection status check so you know the tester is accurate. Tests ¼' (TRS), 1/8' (3.5mm), XLR (3-pin and 5-pin), Speakon (4-pin and 8-pin), RCA, TT, Bantam, RJ45, USB-A, USB-B, DIN (3-pin, 4-pin, 5-pin, 7-pin, or 8-pin).

« Last Edit: September 26, 2016, 04:05:46 PM by admsustainiac »

Offline admsustainiac

Re: Must Have Accessory List for Mobile Guitarists
« Reply #30 on: April 11, 2017, 12:29:09 AM »








MusicNomad MN227 The Octopus 8 'n 1 Tech Tool
Five hex wrench sizes: 10mm, 12mm, 14mm, 1/2", 7/16"
Compact 6" design with ergonomic handle
Great for tightening input/output jacks, control pots, tuning machine bushings and screws
Reversible Phillips & flat blade screwdriver
Made with strong ballistic nylon material to avoid scratching your Hardware or finish

https://www.amazon.com/MusicNomad-MN227-Octopus-Tech-Tool/dp/B06VX1DL9N/ref=lp_10076970011_1_2?srs=10076970011&ie=UTF8&qid=1491892007&sr=8-2

Offline Elantric

Re: Must Have Accessory List for Mobile Guitarists
« Reply #31 on: June 05, 2017, 04:26:47 PM »
Korg Beat Boy  $49
https://www.amazon.com/Korg-KORG-BEATBOY-Beatboy-Tuner-Metronome/dp/B00F0GQ6TS/ref=sr_1_1?ie=UTF8&qid=1496701062&sr=8-1&keywords=Korg+Beatboy+Tuner%2FMetronome
http://www.korg.com/us/products/tuners/beat_boy/




Perform backed by 100 full-fledged rhythm patterns
Use the tap tempo feature to adjust the tempo intuitively, or use the tempo adjustment buttons to make fine adjustments
Adjust the volume of the drum machine to fine tune the mix balance with your guitar sound
Tuner function ensures that your pitch is accurate
Overdrive/distortion effect for electric guitar
Recorder allows 16-bit/44.1 kHz PCM recording and playback
Approximately 20 minutes of recording, with a maximum of 100 tracks
USB port allows your recorded phrases to be easily backed-up to your computer
Internal mic supports acoustic instruments
Built-in speaker lets you immediately listen back to recorded sounds



http://www.korg.com/us/support/download/manual/0/274/2043/
« Last Edit: June 05, 2017, 04:47:20 PM by Elantric »

Offline admsustainiac

Re: Must Have Accessory List for Mobile Guitarists
« Reply #32 on: June 19, 2017, 12:13:04 PM »










ammoon Flanger FX-02 3-in-1
Multifunctional Restringing Tool Motorized String Winder Strings Cutter Bridge Pin Remover with USB Charge Cable for Banjo Guitar Bass Mandolin Ukelele
https://www.amazon.com/gp/product/B01LYCVA9U/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1


Offline Elantric

Re: Must Have Accessory List for Mobile Guitarists
« Reply #34 on: August 31, 2017, 10:41:14 AM »
Meet the new Roadie
( but I might wait a year for the Harbor Freight version ;)
« Last Edit: August 31, 2017, 10:46:27 AM by Elantric »

Offline admsustainiac


Offline Elantric

Re: Must Have Accessory List for Mobile Guitarists
« Reply #36 on: October 03, 2017, 03:51:10 PM »


That Pyle PDC22 looks like a clone of my Palmer PAN04- for $15?!?!?!?!?


http://www.palmer-germany.com/pro/en/PAN-04-DI-Box-2-channel-passive-PAN04.htm

You gotta be kidding, if the performance is anywhere close that's an absolute steal!!! How lucky you guys living in the States are, at least in terms of musical equipment prices....

and same as ART dPDB and Nady DI passive boxes - just different silk screen
http://artproaudio.com/images/products/dpdb/dpdb_top_lg.jpg


Details on a Jenson JT-DB-E Transformer swap
http://www.jensen-transformers.com/transformers/direct-box/


https://www.amazon.com/JENSEN-JT-DB-E-Direct-Box-Transformer/dp/B01LRLJMAO


http://www.radialeng.com/comparing-dis.php

« Last Edit: October 03, 2017, 04:02:03 PM by Elantric »

Offline admsustainiac

Re: Must Have Accessory List for Mobile Guitarists
« Reply #37 on: November 28, 2017, 11:37:40 AM »


http://truetone.com/ma-meter/
The 1 SPOT mA Meter (that’s “milliamp meter” for all you non-engineers), is a simple device for measuring the power consumption of your guitar pedals.

You’re probably used to seeing power supply outputs with ratings like “100mA”, which is the maximum that output can provide for a pedal. And you might have wondered whether it was enough to power your particular pedal(s). The mA Meter answers that question for you by showing exactly how much current your DC powered pedal really needs*.

No more scouring the Web for information about your pedals that might not even be accurate. Just plug your pedal into the mA Meter and see for yourself how much power it needs!

And as an added bonus, we’ve even thrown in a cable tester as part of the mA Meter… perfect for those last second cable checks at the gig.

* Input voltage range: 9-24Vdc; Max current displayed: 999mA


« Last Edit: November 28, 2017, 11:46:40 AM by admsustainiac »