Boss gt100 4 cable method issues

Started by Jay123, January 15, 2017, 09:38:39 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Jay123

Hey Guys,

I'm using the gt100 with my 100highwatt amp 4 cable method. I can get the od wah compression etc to work pre s/r but I'm not getting the delays reverbs etc post s/r. Am I missing something obvious?

Any advice would be great thanks in advance

gumtown

Is the GT-100 connected like..
guitar > GT-100 input
GT-100 S/R Send > hiwatt input
hiwatt FX Send > GT-100 S/R Return
GT-100 L/Mono out > hiwatt FX Return.

Do you have your 4CM patches setup so that the S/R loop is enabled using an Assign or pedal function, and the GT preamps disabled with an assign or pedal function, another way is to move the S/R loop into the GT-100 channel B chain and just flip channels on the GT.

Do you still hear something if you pull the plug from the GT-100 L/Mono output?
if so, your amp FX loop might be a parallel type instead of Serial.
Does the FX loop on the hiwatt have a mix control, this should be 100%
Free "GR-55 FloorBoard" editor software from https://sourceforge.net/projects/grfloorboard/