JTV -Volume-corrected Strat

Started by blueman, August 25, 2013, 09:07:29 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

blueman

This patch tries to correct Workbench HD's (v. 2.01) volume inconsistency on the 1st (E) and 2nd (B) strings. I set the volume by dropping all strings (globally) to 72% and then adjusting only the 1st and 2nd strings (back) to 100%. After that, I bumped the preset volume up by 2dB.  Seems to work for me, but depending on the amp and fx settings, ymmv.

Note: This bank also has some adjustments to the "Pots" on positions 2 and 1; I raised the resistance and capacitance and lowered the tone control to 8.5 -- 10 is just too bright for me.

Attached sound clip demonstrates how the bank sounds stepping through all 5 positions, starting at position 5.

whippinpost91850

Sounds good look forard to teying it out. Thanks