Tyler Variax JTV-69 Necks

Started by Elantric, July 24, 2014, 10:32:25 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Elantric

Line6 JTV-69 Specs state the Nut Width is 1 5/8" inch ( 1.6250") Here is the "too narrow" Nut Width of my 2010 JTV-69 (1.6150")



Here is the Nut Width of my 1996 Variax 600 ( 1.6515")



Here is the Straight Fretboard edge on my 1996 Variax 600



Here is the "Bowed - curved inward Fretboard edge on my 2010 JTV-69 - (Which Line6 Warranty replaced back in 2011 with a Guitar with a straighter fretboard edge.) Problem here was the Low "E" was always falling off the edge of the fretboard , due to lack available fret under the Low E string below the 5th fret !  For New Buyers - its this specific view you want to check on your Tyler JTV-69(s)  - verify the guitar for consideration has a Straight Neck that looks more like the Variax 600 Neck above

Elantric