GR-55 - No sound on 2 out of 3 patches?

Started by acoustic356, June 30, 2016, 03:47:32 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

acoustic356

I had a guitar player come over for lessons so I was using my shiny new GR-5 and the looper.

I was primarily looping in guitar chord progressions and teaching him how to approach playing "safe extensions" to add color in a Contemporary Praise and Worship setting.

Anyway, towards the end, I wanted to show him how the unit worked, and half the patches didn't work!!!

I did a factory reset, and the problem still persisted.

Took me 30 minutes of panic to realize the expression pedal was rocked backwards so the patches were playing just not being heard.

Please tell me I'm not the only one that's done this!

gumtown

#1
QuotePlease tell me I'm not the only one that's done this!
OK, As you wish... "You are not the only one that's done this".
but I suspect you might be  :D

There are many "gotcha's" in the GR-55,
System/Global settings being accidently changed,
GK Volume not turned up or
GK switch in the wrong position.

The factory setup (use of the EXP pedal as patch volume) is only one of many possible setup choices.
Free "GR-55 FloorBoard" editor software from https://sourceforge.net/projects/grfloorboard/