Author Topic: SYNTH•LINX 13-PIN LOCKING JACK LAUNCH!  (Read 6647 times)

0 Members and 1 Guest are viewing this topic.

Offline gumbo

  • Senior Member
  • ****
  • Posts: 964
  • Total likes: 151
  • Rating: 27
  • Changing the 13-pin interface - one Jack at a time
Re: SYNTH•LINX 13-PIN LOCKING JACK LAUNCH!
« Reply #25 on: August 21, 2016, 05:21:13 AM »
Thank you for your kind words, wp...  ...appreciated!   ;)


Cheers,
Peter
Read slower!!!   ....I'm typing as fast as I can...

Offline whippinpost91850

Re: SYNTH•LINX 13-PIN LOCKING JACK LAUNCH!
« Reply #26 on: August 21, 2016, 05:37:24 PM »
Peter You are very very welcome. Thanks for the great product. Paul

Offline Majiken

  • Senior Member
  • ****
  • Posts: 311
  • Total likes: 45
  • Rating: 13
  • The French-surnamed American living in Germany ;-)
Re: SYNTH•LINX 13-PIN LOCKING JACK LAUNCH!
« Reply #27 on: October 15, 2016, 04:00:21 AM »
+1 As soon as I refigure the whole pic linking exercise I will report in detail about my odyssey on my Godin LGX-T, where extreme frustration has been transformed to stage-worthiness and accompanying delight. Peter's outstanding advice and support and the excellent Synth-Linx jack are deciding factors in this transformation, and I recommend the Synth-Linx jacks without hesitation if you are serious about reliable 13-pin performance.
Take what you need, put back a bit more, leave the place behind you better than it was before :-)

www.majiken.rocks

Offline whippinpost91850

Re: SYNTH•LINX 13-PIN LOCKING JACK LAUNCH!
« Reply #28 on: October 15, 2016, 08:24:39 AM »
I couldn't agree more. Peter makes an excellent product

Offline gumbo

  • Senior Member
  • ****
  • Posts: 964
  • Total likes: 151
  • Rating: 27
  • Changing the 13-pin interface - one Jack at a time
Re: SYNTH•LINX 13-PIN LOCKING JACK LAUNCH!
« Reply #29 on: October 15, 2016, 06:27:15 PM »
You're very kind.

The only thing better than having happy customers is having NICE happy customers  !!!

Thank you both.

Peter
Read slower!!!   ....I'm typing as fast as I can...

Offline gumbo

  • Senior Member
  • ****
  • Posts: 964
  • Total likes: 151
  • Rating: 27
  • Changing the 13-pin interface - one Jack at a time
Re: SYNTH•LINX 13-PIN LOCKING JACK LAUNCH!
« Reply #30 on: December 08, 2016, 07:10:15 PM »
Dear Everyone..

Thank you for your continuing interest and support.

There are currently 11 different versions of the Synth-Linx Jack in production, to suit applications in GP-10, GR-55, RR Strat, GC-1 Strat, and a few more DIY areas...one of these days I'll stop long enough to re-write this original 'launch' thread..    ::)

Feel free to PM me with an email address and I'll be happy send you a PDF of the current range and details.

Cheers,
Peter
Read slower!!!   ....I'm typing as fast as I can...

Offline gumbo

  • Senior Member
  • ****
  • Posts: 964
  • Total likes: 151
  • Rating: 27
  • Changing the 13-pin interface - one Jack at a time
Re: SYNTH•LINX 13-PIN LOCKING JACK LAUNCH!
« Reply #31 on: December 23, 2016, 02:37:34 PM »
Woo Hoo !!

5002 Views of this thread (before I added this one, obviously)

...Thanks to Everyone for your interest, and a Merry Christmas to All !

Kind regards from sweltering 40C South Australia  :o

Peter
Read slower!!!   ....I'm typing as fast as I can...

Offline CodeSmart

  • Senior Member
  • ****
  • Posts: 1347
  • Total likes: 321
  • Rating: 53
  • Trying to stay healthy and learn about electronics
Re: SYNTH•LINX 13-PIN LOCKING JACK LAUNCH!
« Reply #32 on: December 23, 2016, 03:46:18 PM »
Kind regards from sweltering 40C South Australia  :o
Happy Holidays Peter.
I suggest emigration to Gumtown land NZ, 22C
/Robert
Got more gear than I need...and I like it!

Offline gumbo

  • Senior Member
  • ****
  • Posts: 964
  • Total likes: 151
  • Rating: 27
  • Changing the 13-pin interface - one Jack at a time
Re: SYNTH•LINX 13-PIN LOCKING JACK LAUNCH!
« Reply #33 on: December 23, 2016, 04:24:43 PM »
Happy Holidays Peter.
I suggest emigration to Gumtown land NZ, 22C
/Robert

Thanks Robert..and wishes for a great holiday to you!  Watch out for Hobbits...

 ;)   ...actually a visit to NZ is tentatively scheduled for 2018..next year is taken up with UK

Read slower!!!   ....I'm typing as fast as I can...

Offline gumbo

  • Senior Member
  • ****
  • Posts: 964
  • Total likes: 151
  • Rating: 27
  • Changing the 13-pin interface - one Jack at a time
Re: SYNTH•LINX 13-PIN LOCKING JACK LAUNCH!
« Reply #34 on: February 12, 2017, 05:58:25 AM »
Hi Everyone..

Just a reminder that there are currently 11 different versions of the Synth-Linx Jack in production, to suit applications in GP-10, GR-55, RR Strat, GC-1 Strat, and a few more DIY areas...   ...the range has expanded somewhat in the intervening years since the initial product launch!

This is not perhaps immediately obvious from the earlier posts in this thread..  ::)

If you would like more information on the various models of Synth-Linx Jacks, please email me on info@synth-linx.com and I'll be happy to email you a PDF of the current range and details on pricing and supply.

The format of this information is not suited to the Forum's 'Personal Message' system and I will guarantee that your personal email address and details will always remain confidential.

Cheers,
Peter  (aka 'gumbo')
SYNTH-LINX
South Australia
Read slower!!!   ....I'm typing as fast as I can...

Offline gumbo

  • Senior Member
  • ****
  • Posts: 964
  • Total likes: 151
  • Rating: 27
  • Changing the 13-pin interface - one Jack at a time
Re: SYNTH•LINX 13-PIN LOCKING JACK LAUNCH!
« Reply #35 on: March 05, 2017, 04:49:34 AM »
Dear V-Folks,

Further to all the information in the post above this one (please read ALL those details!), I wish to bring to your attention that:

By all means please feel free to ask any questions you may have..   I try to cover all the bases, but..     ::)
I'm more than happy to discuss your needs further so that we are both on the same page, and you get the solution that will work best for you.

Another (4MB) PDF entitled "Installation Instructions" is available to give a little more insight into the work required to fit Synth-Linx Jacks; this is available upon request, BUT please first recognise that your Inbox must be able to receive a file of this size.  ....AND I OBVIOUSLY NEED YOUR EMAIL ADDRESS TO SEND IT TO YOU.

When ready to place an order, the process is simply to provide the address of your Paypal account and I'll send you an invoice; shipping is usually within three days of receipt of payment for models IN STOCK.
If the model you require is out of stock at time of order placement, you will be advised of projected delivery delay at time of order placement.
Custom variations as to cable length, etc. are obviously not ex-stock and will be subject to negotiated delivery times.

We have a time difference of about 15 - 17 hours between Australia & USA / Canada, and about 7 - 10.5 hours between Australia and Europe (in Australia we're AHEAD of your time) so sometimes our emails might take a day or so to connect when we are both awake..   8)

Hope this helps you...let me know what further info you may need, etc.

PLEASE BE AWARE THAT I WILL BE TRAVELLING OVERSEAS BETWEEN LATER MARCH AND EARLY MAY 2017. 
ALTHOUGH I WILL CONTINUE TO MONITOR MY EMAILS PERIODICALLY  WHILST I AM AWAY, I REGRET IT WILL NOT BE POSSIBLE FOR ME TO FULFIL ORDERS DURING THIS TIME.


I WILL NOT BE PROCESSING ORDERS AFTER FRIDAY OF THIS COMING WEEK..  MARCH 10TH.

I WILL RESUME PROCESSING FROM APPROXIMATELY MAY 10TH.




Kind regards from Summertime South Australia...  !!      :-*

Peter Harris
SYNTH-LINX
Read slower!!!   ....I'm typing as fast as I can...

Online GuitarBuilder

Re: SYNTH•LINX 13-PIN LOCKING JACK LAUNCH!
« Reply #36 on: March 06, 2017, 09:14:49 AM »
Have a safe trip, Peter!

Offline admsustainiac

Re: SYNTH•LINX 13-PIN LOCKING JACK LAUNCH!
« Reply #37 on: October 10, 2017, 04:20:34 PM »

Review the VG Guitar pic thread - many here use Gumbo's custom GK 13 output jacks
http://www.vguitarforums.com/smf/index.php?topic=8888.0
Only requires a simple 0.595" round hole to install
http://www.vguitarforums.com/smf/index.php?topic=359.msg146367#msg146367
 



instead of the typical hassle of installing the GK-KIT-GT3 Internal kit  13 pin output jack



http://www.strangeguitarworks.com/installing-roland-gk-3-pickup/
« Last Edit: October 10, 2017, 05:37:44 PM by admsustainiac »

Offline gumtown

Re: SYNTH•LINX 13-PIN LOCKING JACK LAUNCH!
« Reply #38 on: October 10, 2017, 05:15:11 PM »
I know this situation all too well,  :P
just a little bit more..... just a little bit more.... WOOOPS !! too much  >:(

Free "GR-55 FloorBoard" editor software from http://sourceforge.net/projects/grfloorboard/

 

Blog