Author Topic: GP-10 & SY-300  (Read 173 times)

0 Members and 1 Guest are viewing this topic.

Offline rsm

GP-10 & SY-300
« on: October 12, 2017, 07:23:57 AM »
I've been using my Boss GT-1 + SY-300 for awhile now. I recently decided to get re-acquainted with my GP-10, and wondered how the SY-300 would pair with it.

Turns out it's working nicely, though I have some work to do to get sounds/patches I dig working together.

GK-3 --> GP-10 --> stereo out to mixer
GP-10 guitar out --> SY-300 --> stereo out to mixer.

Using my Steinberger SS-2F with GK-3.  I just got another GK-3 that I plan to put on my Ibanez RGKP6, I also plan to use my Gittler with this rig.

here's a pic of my test rig as I was setting it up:



Going to add my Roland EV-5 to the SY-300 (which I used when it was paired with my GT-1)
« Last Edit: October 12, 2017, 07:25:39 AM by rsm »
rsm
bass | guitar | keys | Push

Rickenbacker | Steinberger | Boss | Roland
Using Digital and Solid State by Choice

Offline rsm

Re: GP-10 & SY-300
« Reply #1 on: October 12, 2017, 08:13:17 AM »
what other routing / combinations of GP-10 & SY-300 should I consider? :)
rsm
bass | guitar | keys | Push

Rickenbacker | Steinberger | Boss | Roland
Using Digital and Solid State by Choice

Online szilard

Re: GP-10 & SY-300
« Reply #2 on: October 12, 2017, 11:15:40 AM »
Try a main out of GP-10 into the SY-300. I have a sub-out from a VG-99 going into the SY-300 so I can use guitar or cosm into the SY-300. If your mixer has inserts or an aux buss you could use that ...

Offline carlb

Re: GP-10 & SY-300
« Reply #3 on: October 12, 2017, 01:37:35 PM »
GP-10 output into the SY-300 makes sense

Then ...

Take out the mixer, and add a MIDX-20 to allow control of the GP-10, and add a Morningstar MC6 foot controller.

With this, you get any number of coordinated patches between the GP-10 and SY-300. The MC6 is the simplest programming (web-page based) footcontroller that I know of, with editable LED labels for each stompswitch.
SH-575 and SH-475 Carvins, w/ RMC hex and Duncan pickups (mods by iGuitar Workshop)
Boss GP-10 (latest rig), Roland VG-99 (old rig)
Gemini GX-150 FRFR powered speakers (drivers swapped to Carvin NE8-8 for weight and sound)

Offline BackDAWman

Re: GP-10 & SY-300
« Reply #4 on: October 12, 2017, 05:41:59 PM »
How does the Gittler perform as a 13 pin guitar? I was suffering from serious GAS when I first seen these ;D

Offline rsm

Re: GP-10 & SY-300
« Reply #5 on: October 12, 2017, 07:27:07 PM »
Gittler works great all around. Didn't take too long to get used to it, I found if I just played guitar my hands/fingers found their way around.
rsm
bass | guitar | keys | Push

Rickenbacker | Steinberger | Boss | Roland
Using Digital and Solid State by Choice

Offline hippietim

Re: GP-10 & SY-300
« Reply #6 on: October 15, 2017, 03:26:18 AM »
@rsm - I’d love to see some demos of you with the Gittler