Author Topic: Anyone connecting GP-10 to FCB1010 via Raspberry Pi  (Read 195 times)

0 Members and 1 Guest are viewing this topic.

Offline JoBoss

  • Contributing Member
  • ***
  • Posts: 87
  • Total likes: 6
  • Rating: 2
  • Smile and keep the world smiling.....:)
Anyone connecting GP-10 to FCB1010 via Raspberry Pi
« on: October 11, 2017, 09:33:20 AM »
Anyone using the GP-10 connected to the FCB1010 via Raspberry Pi ..?

Offline admsustainiac

« Last Edit: October 11, 2017, 09:39:17 AM by admsustainiac »

Offline JoBoss

  • Contributing Member
  • ***
  • Posts: 87
  • Total likes: 6
  • Rating: 2
  • Smile and keep the world smiling.....:)
Re: Anyone connecting GP-10 to FCB1010 via Raspberry Pi
« Reply #2 on: October 11, 2017, 10:36:19 AM »
Thanks admsustainiac for the reply....I had earlier; however, gone through the relevant posts regarding the same before posing my question...

Does any one know if there is a preloaded Raspberry Pi available off the shelf that I can connect the GP-10 and FCB straightaway without much ado..just like the MIDX-10 or 20....?  In short a plug and play Raspberry Pi for the GP-10..if so where....?

Offline admsustainiac

Re: Anyone connecting GP-10 to FCB1010 via Raspberry Pi
« Reply #3 on: October 11, 2017, 10:48:42 AM »
Nothing preloaded - its DIY and all details are here:
http://www.vguitarforums.com/smf/index.php?topic=11998.0

Offline sixeight

Re: Anyone connecting GP-10 to FCB1010 via Raspberry Pi
« Reply #4 on: October 11, 2017, 10:51:01 AM »
I can build you one of these:



It has serial midi connections on the other side, so you can connect it straight to the FCB1010.

I will send you a pm with more information...
« Last Edit: October 11, 2017, 10:56:13 AM by sixeight »

Offline JoBoss

  • Contributing Member
  • ***
  • Posts: 87
  • Total likes: 6
  • Rating: 2
  • Smile and keep the world smiling.....:)
Re: Anyone connecting GP-10 to FCB1010 via Raspberry Pi
« Reply #5 on: October 12, 2017, 03:07:56 AM »
Thanks sixeight...looking forward to your PM

Offline Redvers

Re: Anyone connecting GP-10 to FCB1010 via Raspberry Pi
« Reply #6 on: October 12, 2017, 03:53:03 AM »
Using the aconnect command it's very easy to connect the two, you just need to make it launch on startup. A preloaded image is great but I'm guessing if you plugged into the wrong USB port the port numbers would get mixed up.

Offline sixeight

Re: Anyone connecting GP-10 to FCB1010 via Raspberry Pi
« Reply #7 on: October 12, 2017, 04:49:39 AM »
Using the aconnect command it's very easy to connect the two, you just need to make it launch on startup. A preloaded image is great but I'm guessing if you plugged into the wrong USB port the port numbers would get mixed up.

You can also do aconnect by name. That way it will always connect correctly.

And I found the aconnect numbers are not related to a port, but related to the order in which you connect USB devices. Here is how I set things up for the VController RPI bridge (called VCbridge)

https://github.com/sixeight7/VCbridge/blob/master/RPi%20full%20install%20VCbridge.txt

Offline sixeight

Re: Anyone connecting GP-10 to FCB1010 via Raspberry Pi
« Reply #8 on: October 12, 2017, 11:30:18 AM »
Thanks sixeight...looking forward to your PM

PM sent...
« Last Edit: October 12, 2017, 12:15:34 PM by sixeight »

 

Blog