Author Topic: Luthier Tools  (Read 454 times)

0 Members and 1 Guest are viewing this topic.

Offline Elantric

Luthier Tools
« on: January 11, 2017, 06:16:34 PM »
This tool is handy for determining magnetic guitar pickup polarity, and creating "hum-bucking action" from multiple pickups by measuring the magnetic polarity and flux path

https://www.amazon.com/gp/product/B00OQRG0HA/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

CMS Magnetics Magnetic Pole Detector



« Last Edit: January 11, 2017, 06:18:18 PM by Elantric »

Offline nix808

Re: Luthier Tools
« Reply #1 on: January 11, 2017, 08:50:38 PM »
Thanks Elantric!
That's cool for all kinds of magnetic stuff.
(edit- these can also be replaced with a compass I guess)

I'll try to put a couple of things I have learnt:

What about nut and saddle files(do you have a link?)?
These may be commonly known as 'needle files',
and I use my needle ones.

To make routing unnecessary(ie.tummy cut type stuff),
sometimes you can use very long drill bits.
These can be knocked up, as wood isn't that hard.
U can weld extended shanks on.

Pickguards can be unbent with a paintstripper, and flat weights once maximally heated.

Prolly don't use steel wool when pups will attract it. Scotch-Brite pads are harder than fine grit steel wool.

Danish wax is great for oil finishes-- a lustre

Stanley blades are fine for curved 'cabinet finishing'

Hope helps!-
I'll add more if I think of anything. I made a terribly crafted Tasmanian hardwood bass,
and have assembled 2 hexaphonic Fenderesque guitars from parts.
« Last Edit: January 11, 2017, 08:54:13 PM by nix808 »
Rock and Rock my boat, as long as you don't rock and rock my boat!hehe

Offline Elantric

Re: Luthier Tools
« Reply #2 on: January 11, 2017, 11:38:48 PM »
Many tools are listed here

https://www.amazon.com/s/ref=nb_sb_noss_2?url=search-alias%3Daps&field-keywords=nut+files


http://www.warmoth.com/Files-C215.aspx



Stewart-MacDonald  / Dan Erlewine Trade Secrets Videos
http://www.vguitarforums.com/smf/index.php?topic=8776.msg62979#msg62979

If you have questions, please contact us through our webpage http://www.stewmac.com/email or visit our Facebook page https://www.facebook.com/StewMac

For more information on tools and parts:
Stewmac Ultimate Scraper
http://www.stewmac.com/0631.html

Plastic Humbucker Mounting Rings
http://www.stewmac.com/1509.html

Fret Puller
http://www.stewmac.com/1637.html

Nut and Saddle Shaping Files
http://www.stewmac.com/4556.html

Scraper Blades
http://www.stewmac.com/0654.html

3M Double-stick Tape
http://www.stewmac.com/1689.html

Sandpaper / Finishing Paper Sample
http://www.stewmac.com/5562.html









been doing the Baking Soda + Super Glue "quick fix"  since 1977 -

but it always best to get a new Nut - these days I prefer a GraphTech

and use Warmoth Nut files and Xacto saw

http://www.warmoth.com/Nut-Files-Set-of-3-P44C215.aspx



or alternatives



https://www.amazon.com/Double-Edge-Files-Acoustic-Guitars/dp/B00BKNX9FO


https://www.amazon.com/FOXNOVO-Stainless-Winder-Guitar-Luthier/dp/B00PC17212



« Last Edit: June 16, 2017, 02:15:47 PM by Elantric »

Offline Beirne

Re: Luthier Tools
« Reply #3 on: January 13, 2017, 12:20:34 PM »
´╗┐´╗┐Concave Fret End File
Costly for a file, but it made my dried out fretend finger shredding strat play like butter.


http://www.stewmac.com/Luthier_Tools/Types_of_Tools/Files/Concave_Fret_End_Files.html?utm_source=google&utm_medium=shopping&utm_campaign=2017-01-gp&gclid=CJzu08fdv9ECFUWHswodM48Cuw

Offline Elantric



Offline admsustainiac

Re: Luthier Tools
« Reply #6 on: October 13, 2017, 11:17:49 AM »


Good source for parts and tools

http://www.philadelphialuthiertools.com/

Offline admsustainiac


Offline lespauled

Re: Luthier Tools
« Reply #8 on: October 14, 2017, 10:17:08 AM »
DIY Tools:

Shims:
A couple of things that I use are an old aluminum can. I cut off the ends with tin snips, and cut down from top to bottom.   This gives me a piece of aluminum.  I hammer it flat, and keep it for any occasion I need to shim a Floyd locking nut, or anything else.

Fretboard savers:
I use the aluminum sheet that I created for shim, and cut out a piece longer than the width of the fretboard.  I then fold it in half, and make a couple of notches on the folded edge larger than the width of the fretboard .  I then cut out the piece between the 2 cuts and unfold it, and bang it back to flat.  I sand down the edges, making sure there are no sharp edges. I then use those as fretboard protectors when doing any fret work.

Fretboard Sander/Leveling beam:
I wait for a sale on some hardware beam levels.  One side of the level is perfectly flat.  On that side, I put double sided tape, and put sandpaper (face down) on a flat surface.  I then push the level onto the flat surface.  The double sided tape makes the sandpaper stick to the level.  You now have a leveling beam.  Get a couple of them for different grits, and you are well on your way fretboard leveling.   One caveat:  I generally get cheap ones for this method, but I make sure the beam is perfectly flat.  First I get a straight edge ruler off the rack in the store, and hold it up to the light, looking for gaps.  I use both edges of the straight edge to make sure there aren't imperfections on both items.  Very rarely will that happen on both sides.  When home, I then put the new level on top of my dewalt level, and having a light shine behind it.  If I see any light getting through, I return it to the store, and get another.

Fret Crowning file:

I buy a 3 sided file, and I grind down one of the 3 edges perfectly flat.  It doesn't take long at all.  This gives you a file that you can lay on the fretboard and give you a perfect angle for the crown, without making a single mark on the fretboard.   Note that during the grinding process, I also slightly grind the sides of the edge so there are no teeth that will mar the fretboard.

Offline admsustainiac

Re: Luthier Tools
« Reply #9 on: October 31, 2017, 01:53:34 PM »


Ive done this - it works well, and allows wet sanding / polishing

Offline scratch17

Re: Luthier Tools
« Reply #10 on: November 02, 2017, 11:48:52 AM »
Next it will be Gorilla Glue with a fur finish and Silverback, representing the King Kong of guitars!
Gibson SG Standard
Hamer Duotone
B Moore i2.13
Taylor 710BCE

VG-99 FC-300
RMC Fanout
RJM Mmind GT10
Kemper PA
Mackie 1640
Line6 L2M
FTP

Mesa Recto Pre 20/20
Marshall DSL401C
Fender Bandmaster 68
Ampeg AX70

UA Apollo 8 Duo, Quad
MOTU Trav x2
Radial JDV X-AMP
Fish Aura
Weehbo Plexface
EHX Epitome

Offline admsustainiac

« Last Edit: November 08, 2017, 07:01:31 PM by Elantric »

 

Blog