FC300 with VG99 & GR55

Started by R and R, October 24, 2012, 05:00:53 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

R and R

Can anyone help me to control a VG99 & gr55 with a single FC300? Thanks.
VG99
GR55
FC300

szilard

Do you have any specific questions? I have the GR-55 slaved to the VG-99, but it's a home studio setup, not performance based.

FC-300 --->  VG-99 ---midi out---->  MOTU midi express XT
                                                                    |
                   GR-55 ---midi out---------------> |
                                                                    |---midi in----> GR-55

The FC-300/VG-99 sends control signals to other devices (PC\modulation).
The GR-55 sends midi note/pitch bend data to other devices.

I haven't found a way to control the hold function on the GR-55 from the FC-300, but I haven't really investigated it.


Kevin M

I have this setup as well and am able to control a number of things (effects, alt  tuning switch, etc) via assigns.  In the VG 99 editor I set the corresponding ctl switch to send a given CC and then in the 55 created an assign for that CC to control the effect (or whatever)