VGuitar Forums

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 ... 57 58 [59]   Go Down

Author Topic: GR-55 - Gumtown's GR-55 FloorBoard Editor  (Read 180204 times)

0 Members and 1 Guest are viewing this topic.

concordal

Re: GR-55 - Gumtown's GR-55 FloorBoard Editor
« Reply #1450 on: January 30, 2017, 01:18:00 AM »

Thanks, Gumtown.  Under Yosemite (10.10.5) that version gives the following message:

GR-55FloorBoard cannot be opened because of a problem.   Check with the developer to make sure GR-55FloorBoard works with this version of OS X. You may need to reinstall the application. Be sure to install any available updates for the application and OS X.


Logged

mervholden

Re: GR-55 - Gumtown's GR-55 FloorBoard Editor
« Reply #1451 on: January 30, 2017, 02:04:43 AM »

Sorry to say but I also get same message with OS X El Capitan (version 10.11.6)

P.S. Many thanks for your efforts and ongoing development
Logged

Sergio

Re: GR-55 - Gumtown's GR-55 FloorBoard Editor
« Reply #1452 on: January 30, 2017, 08:17:30 AM »

I am not sure what you mean by this?
Nothing has been removed, and there is no special setting for Fender GC1 guitars.

The "INIT PATCHES" tab (below "Connect and Write") has disappeared in the new version.
But, the latest version does not work.
Anyway, thanks for your work and your time.
Logged

mercury1

  • Contributing Member
  • ***
  • Total likes: 4
  • Rating: 0
  • Offline Offline
  • Posts: 26
  • Houston...we have a problem
Re: GR-55 - Gumtown's GR-55 FloorBoard Editor
« Reply #1453 on: January 30, 2017, 08:47:50 PM »

Hi gumtown,
 After many hours of removing and installing I'm now on Ubuntu 16.04 64bit. I had a moment of success with my first upgrade to 16.04 and actually brought up the gui and thought i might have it but after logging out I lost all privileges for everything. Many more hours of trying to fix the buggy install I started over and feel I finally might have a more stable version of linux with crouton xenial. I ran the ldd command from the gr55floorboard folder for dependences . 1 file was not found which was libmng. I tried to install it but it said it was obsolete and recommended libmng2, which I installed. program still wont load however I did get a glimpse of the startup screen once for about a second. I've had a lot of problems with all versions of linux on the chromebook mostly due to permissions and policy agent. I'm wondering if that could be my underlying issue here but I don't know enough about linux to troubleshoot further. Any ideas?......thanks for all your help
Logged
Gr-55, Gr-33, Gr-1, Vg-88, Jamman looper, Brian More 88.13  ,/ 8.13 , Fender hm strat( gk-3 ), Hammer( int gk-2) , Behringer V-ampire Lx1200 / fcb1010

gumtown

  • Global Moderator
  • Senior Member
  • *****
  • Total likes: 328
  • Rating: 195
  • Offline Offline
  • Posts: 4667
Re: GR-55 - Gumtown's GR-55 FloorBoard Editor
« Reply #1454 on: January 31, 2017, 04:34:37 AM »

Sorry about the recent issues with the latest builds of the GR-55FloorBoard editor,
everything runs fine on my machine,
but it is also the development environment with all the needed library files needed to run the application.
So I have tried a different approach, and cross-compiled the editor from it's native Qt5 framework to X-Code.

I have uploaded one to try, it seems a lot smaller in file size, so I am not too optimistic on it running,
but if someone could try this mac version and let me know if it runs
https://sourceforge.net/projects/grfloorboard/files/GR-55/GR-55FloorBoard_mac-64.zip/download

Logged
Free "GR-55 FloorBoard" editor software from http://sourceforge.net/projects/grfloorboard/

mervholden

Re: GR-55 - Gumtown's GR-55 FloorBoard Editor
« Reply #1455 on: January 31, 2017, 07:11:11 AM »

No luck with you're new version for Mac - don't understand why it would be so small compared to previous versions either?
Anyway i've attached the error report in case it gives any clues:-
Logged

gumtown

  • Global Moderator
  • Senior Member
  • *****
  • Total likes: 328
  • Rating: 195
  • Offline Offline
  • Posts: 4667
Re: GR-55 - Gumtown's GR-55 FloorBoard Editor
« Reply #1456 on: February 02, 2017, 04:54:13 AM »

OK.... I think it is sorted this time,
I installed a second Sierra operating system, without the build environment and libraries, just a blank new vanilla sierra.
I quickly found the problem and fixed it,
and a new mac 64 update is posted, this should run from OS X 10.8 to 10.12

download here
https://sourceforge.net/projects/grfloorboard/files/GR-55/GR-55FloorBoard_mac-64.zip/download

please let me know if it does not work for you.
Logged
Free "GR-55 FloorBoard" editor software from http://sourceforge.net/projects/grfloorboard/

mervholden

Re: GR-55 - Gumtown's GR-55 FloorBoard Editor
« Reply #1457 on: February 02, 2017, 06:21:06 AM »

Great stuff Gumtown - latest build 20170128 for Mac works fine - many thanks
Logged

Raca339

Re: GR-55 - Gumtown's GR-55 FloorBoard Editor
« Reply #1458 on: February 04, 2017, 02:39:38 PM »

Hello !
This is my first post here and I want to say a big THANK YOU to gumtown for this editor !!
I am on MacOS 10.12.3. I did not actually edit a patch yet, but looking at how it looks it seems to work.
I bought a brand new GR-55 yesterday in a shop here in Paris, France.
Logged

concordal

Re: GR-55 - Gumtown's GR-55 FloorBoard Editor
« Reply #1459 on: February 09, 2017, 10:36:01 PM »


Gumtown, many thanks for all your efforts and the new Mac version.

The ASSIGN 6 problem detailed in this post  (http://www.vguitarforums.com/smf/index.php?topic=2951.msg123235#msg123235)  is still present under Yosemite.  It may appear to be resolved because the bug doesn't occur for all parameters.

Hope this is helpful, Colin.
Logged

M4CH1N3GUNKFUNK

Re: GR-55 - Gumtown's GR-55 FloorBoard Editor
« Reply #1460 on: March 03, 2017, 10:51:16 AM »

Hello, I'm hoping that someone can help me out with this issue. I am kind of a linux newb but recently got into ubuntu studio and ardour and find it's pretty powerful. I have my gr-55 loading in windows fine but I am having some trouble in linux. Can someone give me instructions on how to proceed. I extracted the Floorboard tar.gz to my desktop and when I click on the GR-55Floorboard icon in extracted folder nothing happens. I don't know if I missed a step sorry if this is a repeat question I browsed a few pages back and couldn't find anything. Thanks for any insight!
Logged

gumtown

  • Global Moderator
  • Senior Member
  • *****
  • Total likes: 328
  • Rating: 195
  • Offline Offline
  • Posts: 4667
Re: GR-55 - Gumtown's GR-55 FloorBoard Editor
« Reply #1461 on: March 03, 2017, 02:00:06 PM »

Hi,
Do you have the correct version for your operating system (32bit vs 64bit)?

Also try running from the terminal in the same directory/folder as the GR-55FloorBoard editor executable,
 type the command
ldd GR-55FloorBoard
and it will display the dependency libraries which are present or missing.
Logged
Free "GR-55 FloorBoard" editor software from http://sourceforge.net/projects/grfloorboard/

M4CH1N3GUNKFUNK

Re: GR-55 - Gumtown's GR-55 FloorBoard Editor
« Reply #1462 on: March 04, 2017, 08:15:29 AM »

I am running 64bit ubuntu studio 16.10 and I downloaded the GR-55FloorBoard_linux-64.tar.gz file from sourceforge. It extracted fine but I don't see any sort of file extension on the program itself. Thanks for the quick response!
Logged

M4CH1N3GUNKFUNK

Re: GR-55 - Gumtown's GR-55 FloorBoard Editor
« Reply #1463 on: March 04, 2017, 08:18:21 AM »

The results of the ldd command are as follows

$ ldd GR-55FloorBoard
   linux-vdso.so.1 =>  (0x00007ffd4a7e8000)
   libasound.so.2 => /usr/lib/x86_64-linux-gnu/libasound.so.2 (0x00007fd9e0fb1000)
   libX11.so.6 => /usr/lib/x86_64-linux-gnu/libX11.so.6 (0x00007fd9e0c78000)
   libX11-xcb.so.1 => /usr/lib/x86_64-linux-gnu/libX11-xcb.so.1 (0x00007fd9e0a76000)
   libXi.so.6 => /usr/lib/x86_64-linux-gnu/libXi.so.6 (0x00007fd9e0866000)
   libxcb.so.1 => /usr/lib/x86_64-linux-gnu/libxcb.so.1 (0x00007fd9e0644000)
   libfontconfig.so.1 => /usr/lib/x86_64-linux-gnu/libfontconfig.so.1 (0x00007fd9e03ff000)
   libfreetype.so.6 => /usr/lib/x86_64-linux-gnu/libfreetype.so.6 (0x00007fd9e0152000)
   libjasper.so.1 => not found
   libmng.so.2 => /usr/lib/x86_64-linux-gnu/libmng.so.2 (0x00007fd9dfed6000)
   libtiff.so.5 => /usr/lib/x86_64-linux-gnu/libtiff.so.5 (0x00007fd9dfc63000)
   libwebp.so.5 => not found
   libjpeg.so.8 => /usr/lib/x86_64-linux-gnu/libjpeg.so.8 (0x00007fd9df9f7000)
   libpng12.so.0 => not found
   libz.so.1 => /lib/x86_64-linux-gnu/libz.so.1 (0x00007fd9df7dd000)
   libdl.so.2 => /lib/x86_64-linux-gnu/libdl.so.2 (0x00007fd9df5d9000)
   librt.so.1 => /lib/x86_64-linux-gnu/librt.so.1 (0x00007fd9df3d1000)
   libpthread.so.0 => /lib/x86_64-linux-gnu/libpthread.so.0 (0x00007fd9df1b3000)
   libstdc++.so.6 => /usr/lib/x86_64-linux-gnu/libstdc++.so.6 (0x00007fd9dee29000)
   libm.so.6 => /lib/x86_64-linux-gnu/libm.so.6 (0x00007fd9deb20000)
   libgcc_s.so.1 => /lib/x86_64-linux-gnu/libgcc_s.so.1 (0x00007fd9de909000)
   libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00007fd9de542000)
   /lib64/ld-linux-x86-64.so.2 (0x00005597f3faf000)
   libXext.so.6 => /usr/lib/x86_64-linux-gnu/libXext.so.6 (0x00007fd9de330000)
   libXau.so.6 => /usr/lib/x86_64-linux-gnu/libXau.so.6 (0x00007fd9de12c000)
   libXdmcp.so.6 => /usr/lib/x86_64-linux-gnu/libXdmcp.so.6 (0x00007fd9ddf24000)
   libexpat.so.1 => /lib/x86_64-linux-gnu/libexpat.so.1 (0x00007fd9ddcfa000)
   libpng16.so.16 => /usr/lib/x86_64-linux-gnu/libpng16.so.16 (0x00007fd9ddac8000)
   liblcms2.so.2 => /usr/lib/x86_64-linux-gnu/liblcms2.so.2 (0x00007fd9dd871000)
   liblzma.so.5 => /lib/x86_64-linux-gnu/liblzma.so.5 (0x00007fd9dd64e000)
   libjbig.so.0 => /usr/lib/x86_64-linux-gnu/libjbig.so.0 (0x00007fd9dd440000)
Logged

M4CH1N3GUNKFUNK

Re: GR-55 - Gumtown's GR-55 FloorBoard Editor
« Reply #1464 on: March 08, 2017, 07:51:13 PM »

Any advice is appreciated I tried searching the missing libraries and did something like

sudo ln -s /lib/x86_64-linux-gnu/libpng12.so.0 /usr/lib64/libpng12.so.0

for each library that was missing and I'm still getting nowhere? I am not a linux expert but can usually find my way around through google.
Logged

Hey_Joe

Re: GR-55 - Gumtown's GR-55 FloorBoard Editor
« Reply #1465 on: April 06, 2017, 10:41:54 AM »

Hey Gumtown -
I downloaded the latest floorboard editor this morning 4/6/17. It's been so long since I've used the GR-55 and the last editor which I had working just fine...but after downloading the new version I plugged the GR in and my machine needed the drivers again -DLed them and tried to use the editor. I have forgotten how to set up default folder and the midi prefs. I'm on Win7 64bit. USB to PC. Can you point me to a post that you have described the procedure to connect. I haven't been here for quite some time and forget everything I once knew about how to find and make the editor and GR-55 connect. Have the PDF help file but no joy. Can you please help me get it reconnected?

Thanks,
Mark
« Last Edit: April 06, 2017, 04:56:45 PM by Hey_Joe »
Logged

Hey_Joe

Re: GR-55 - Gumtown's GR-55 FloorBoard Editor
« Reply #1466 on: April 07, 2017, 05:43:03 PM »

I finally got the editor to connect to the GR-55. Messed with the preferences in the USB/midi section. I think using the deBUG Mode button helped it connect and read the patches from the unit. Don't know for sure but all is well except that the EXIT button and the screen size in the top right don't work. Can't remember if they worked in the last version but Exit under the File menu shuts it down and I don't need the screen size to be adjusted.
 So never mind my first post requesting help. Thanks so much for creating the editor and for the continued work on improvement.

Thanks,
Mark
Logged

gumtown

  • Global Moderator
  • Senior Member
  • *****
  • Total likes: 328
  • Rating: 195
  • Offline Offline
  • Posts: 4667
Re: GR-55 - Gumtown's GR-55 FloorBoard Editor
« Reply #1467 on: April 07, 2017, 07:20:32 PM »

I made this version with a forced window box size,
so it is missing the maximise and exit tab on the window box corner as a side effect.
I thought that, and a few extra hi-res mode font sizing commands might fix the oversize fonts issue... but alas   :(
Logged
Free "GR-55 FloorBoard" editor software from http://sourceforge.net/projects/grfloorboard/

gumtown

  • Global Moderator
  • Senior Member
  • *****
  • Total likes: 328
  • Rating: 195
  • Offline Offline
  • Posts: 4667
Re: GR-55 - Gumtown's GR-55 FloorBoard Editor
« Reply #1468 on: April 09, 2017, 02:35:13 AM »

Another update of the windows version, trying to get it right ....
now at version 20170409
fixed the midi device selection of the GR-55, the "auto GR-55 device select"  didn't do as it should, but now does..


Also trying so extra code to limit the font sizing on 4K hi res monitors, I hope it works, I don't have a 4K display.

https://sourceforge.net/projects/grfloorboard/
Logged
Free "GR-55 FloorBoard" editor software from http://sourceforge.net/projects/grfloorboard/

teejay

Re: GR-55 - Gumtown's GR-55 FloorBoard Editor
« Reply #1469 on: June 10, 2017, 03:15:48 PM »

Thanks for the hard work!

I couldn't get my GR55 to connect in Sierra, came here, eventually got to the latest version and HOORAY!!!!



I really, really wouldn't want to have to program it without the editor, so a million thanks, and a second donation from me.


Long live Gumtown and VGuitarForums!!!!



Logged
Custom KGB headless, internal GK2a and sustainiac stealth plus. VG99+FC300 via Boss RC30 looper into aux ins on Line6 DuoVerb. Digitech VL4 fed via D/A converter from Digital out of VG99
Pages: 1 ... 57 58 [59]   Go Up
 

Blog