Roland GR55 s1 s2 switch sequence

Started by greenmickwm, October 05, 2017, 09:18:32 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

greenmickwm

How do I get S1 and S2 in sequence rather than jumping two patches each time?

Elantric

QuoteHow do I get S1 and S2 in sequence rather than jumping two patches each time?

Something is wrong - save your patches and perform a GR-55 Factory Reset
https://www.sweetwater.com/sweetcare/articles/roland-gr-55-factory-reset-initialize/
Use the following procedure to clear the GR-55's internal memory and reload its factory settings.

Caution: All User information is lost during a Factory Reset. Be sure to first back up anything you wish to keep before proceeding.

1. Press EDIT.

2. Press the right-hand PAGE button to select the SYSTEM tab.

3. Cursor to "BACKUP/INIT," and then press ENTER.

4. Cursor to "FACTORY RESET," and then press ENTER.

5. Cursor to "OK," and then press ENTER—"FACTORY RESET..." appears in the display.

6. When "PLEASE RESTART" appears, turn the GR-55's power off and back on.